541311

AAS Ultra Analog VA-2 Manual

56
Zoom out
Zoom in
Previous page
1/66
Next page
56 Utility Section
5.4 History and Compare
The History control allows one to go back through all the modifications that were made to programs
since the application was started. In order to travel back and forth in time, use the left and right-
pointing arrows respectively. The application will switch between different program states and
indicate the time at which they were modified.
The Compare button, located above the Program display, is used to switch between Edit and
Compare mode. This button is visible only once a modification is applied to a given program. It
allows one to revert to the original version of a program in order to compare it with the current
version. When in Compare mode, edition is blocked and it is therefore not possible to modify any
parameter. The Compare mode must then be switched off by clicking on the Compare button in
order to resume edition.
5.5 Volume
The Volume knob is the master volume of the application. It is used to adjust the overall level of
the output signal from the synthesizer. General level is increased by turning the knob clockwise.
5.6 Level Meter
The level meter allows one to monitor peak and RMS (root means square) level of the left (L) and
right (R) output channels from the synthesizer. As a limiter is located at the output of Ultra Analog
VA, it is important to make sure that the amplitude of the signal remains within values that ensure
that no distortion is introduced in the signal at the output.
The 0 dB mark on the level meter has been adjusted to correspond to -20 dBFS (full scale). This
means that at that level, the signal is -20 dB below the maximum allowed value. This 0 dB level
mark should typically correspond to playing at mezzo forte (moderately loud) level. This ensures
a headroom of 20 dB which should be more than enough to cover the dynamics of most playing
situations and therefore guarantee that no additional distortion is added in the output signal.
A peak value mark allows one to follow the maximum level values reached by the output signal.
The limiter is triggered when this mark enters the red zone of the level meter (17 dB) and it remains
active while the side vertical bars at the top of the lever meter are switched on.
5.7 The About Box
The About box is open by clicking on the chevrons located at the very top of the interface or on
the product or company logo. The box is closed by clicking again on the chevrons or outside the
box. Useful information is displayed in this box such as the program’s version number, the serial
number that was used for the authorization and the the email address that was used for registration.
The box also includes a link to the pdf version of this manual.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Ultra Analog VA-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog VA-2 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info