Manual AAS Ultra Analog Session (page 33 of 53) (English)

541317

Zoom out

Zoom in

1/53

4.7 The Output Effect Stage 33

note is determined by the value (in BPM) appearing in the Tempo display of the

Clock module. The effect can also be synced to a triplet (t) or dotted note (d).

The different chorus algorithms can be controlled with the three knobs appear-

ing at the bottom of the module. The Mix knob is used to adjust the ratio of “dry”

and “wet” in the output signal of the module. When the knob is adjusted in the left

position, only the original or “dry” signal is sent to the output while in the right po-

sition only the processed or “wet” signal is sent to the output. In its center position

there will be equal amounts of “dry” and “wet” signal in the output signal. The

Depth knob is used to adjust the amount of variation of length in the delay lines

which controls the amplitude of the effect while the Rate knob is used to ﬁx the

frequency of the modulation.

4.7.2 The Delay Module

This module is a standard ping pong delay which is used to generate echo. It is

based on two delay lines each including a low-pass ﬁlter. The effect is obtained by

feeding back the signal at the end of each delay line into the input of the other line

with an attenuation coefﬁcient. The result is a signal traveling from one channel to

the other, each time attenuated and ﬁltered in the high frequencies due to the gain

factor and the presence of the low-pass ﬁlter.

The different delay algorithms can be controlled with the three knobs appearing

at the bottom of the module. The Mix knob is used to adjust the ratio of “dry” and

“wet” in the output signal of the module. When the knob is adjusted in the left

position, only the original or “dry” signal is sent to the output while in the right

position only the processed or “wet” signal is sent to the output. In its center

position there is in equal amounts of “dry” and “wet” signal in the output signal.

The Depth knob is used to adjust the amount of signal re-injected from the output

of a line into the other one while the Rate knob controls the length of the delay

lines and therefore the delay between echoes.

4.7.3 The Reverb module

The Reverb module is used to recreate the effect of reﬂections of sound on the

walls of a room or hall. These reﬂections add space to the sound and make it

warmer, deeper, as well as more realistic since we always listen to instruments in a

room and thus with a room effect.

The Reverb drop down menu is used to choose between different reverb al-

gorithms representing different types of rooms or halls. Each algorithm can be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Ultra Analog Session in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Ultra Analog Session Manual

Product: