541310
111
Zoom out
Zoom in
Previous page
1/177
Next page
6.48 Nand 111
6.48 Nand
The Nand module performs the inverse of the logical AND operation. The one output of this
module is either 1 (true) or 0 (false) depending on the values sent to the two inputs. This module
has no front panel. The following diagram shows the output value depending on the values in the
two inputs.
Input1 Input2 Output
1 1 0
1 0 1
0 1 1
0 0 1
Table 2: Nand module output as a function of its inputs.
Input signals are considered False (0) when smaller than 0.1 Volts and True (1) when greater
than 0.1 Volts.
6.49 Noise
The Noise module outputs white noise. It has no input and one output, the noise signal. This
module has no front panel.
Typical Use
The Noise module can be used as a sound source in analog synthesizers. It can be used to create
percussion sounds or special effects.
6.50 Noise mallet
The Noise Mallet module can be used as an alternative to the Mallet
module. This module outputs the same signal as the Mallet module, but, in
addition to the impact noise, it also generates white noise. The force of the
impact is adjusted with the strength knob, while the stiffness of the mallet,
related to its material, is varied with the stiffness knob.
This module has one output, the impact signal, and three inputs. The first
input triggers the mallet every time a low-to-high transition is encountered
in the input signal. This input is usually connected to the gate signal from a
Keyboard module. Note that the Noise Mallet can also be triggered manu-
ally by using the trig button on the front panel. The second input signal modulates the stiffness of
the mallet relative to the value selected with the stiffness knob. The amplitude of the modulation is
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Tassman 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info