Manual AAS Tassman 4 (page 110 of 177) (English)

541310

110

Zoom out

Zoom in

1/177

6.47 Multi-sequencer 110

The numbered gate buttons control the gate output signal. The output will generate a square

pulse of 1/8 of a quarter note with an amplitude of 1 Volt for each active gate buttons. To hear a

step, the gate button must be clicked (green light on). The loop buttons are used to set the length

of the Pattern from 1 to 16 steps.

Song Mode

The sequencer can play patterns individually or in a programmed order using a song. The song

mode is activated by placing the mode selector to song. The sequencer can hold 8 songs. A song

can hold up to 1000 events. The sequencer will loop each time a song ends. To make the sequencer

stop at the end of a song, the once button must be clicked.

Five parameters are associated with each pattern on the square display: pattern, primary loop

point (L), primary loop times (PRI), secondary loop times (SEC) and play mode (MODE). Each of

the parameters on the window is adjusted by clicking-holding and dragging. The keyboard arrows

can also be used once a parameter has been selected. The pattern parameter determines the pattern

to be played for a given event, from A1 to D8.The primary loop is a group of events that will be

played a number of times equal to the value of the primary loop times (PRI) parameter. In order

to program a primary loop of events, the beginning and the end of the loop must be selected by

the primary loop point parameter. This parameter has 3 values: none (-), start (S) and end (E).

Selecting start sets the return point of the loop to a given event and activates the primary loop times

parameter, which can be set from 1 to 99. Selecting end (E) in any subsequent event will make the

sequencer return to the start event until the number of loops is reached. Note that placing a primary

loop inside another one will not produce the desired effect. The secondary loop times parameter

sets the number of times an event will be played before switching to the next. It can be set from 1

to 99. The play mode parameter change the play mode of the sequencer. The sequencer will stay in

the selected play mode for the next events. In order to make song programming easier, use of the

play from position (PFP) button is useful. It allows to start the song from a selected event. When

clicked, the ﬁrst event in the edit window will be remembered as the ﬁrst and return event of the

song.

Editing a song

The song info window at the top of the event window displays the event currently being played or

selected with the wheel located at the right of the event window. Events can be removed from a

song by clicking on the “-” button on the right of the song info window. Pressing on the “+” button

inserts a new event after the event currently selected.

Note: see also Control Voltage Sequencer, Control Voltage Sequencer with Songs, Single

Gate Sequencer, Single Gate Sequencer with Songs, Dual Gate Sequencer and Dual Gate

Sequencer with Songs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Tassman 4 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Tassman 4 Manual

Product: