Manual AAS String Studio VS-1 (page 47 of 71) (English)

541313

Zoom out

Zoom in

1/71

4.17 The Arpeggiator Module 47

when it is turned clockwise the depth of the vibrato will increase when the modulation wheel is

used. The increase is always relative to the position of the Amount knob and will be greater as the

Mod knob is turned clockwise.

The vibrato can be adjusted not to start at the beginning of a note but with a little lag. This

lag is set by the Delay knob. The Fade knob allows you to set the amount of time taken by the

amplitude of the vibrato effect to grow from zero to the amount set by the Amount knob.

The last parameter is used to add liveness to the sound. When several musicians play together,

they do not necessarily start their vibrato exactly at the same time, speed and amplitude. The

Error knob is used to produce this effect by adding an error to the Rate, Amount, Delay and Fade

parameters of the vibrato of each polyphonic voice. As the Error knob is turned clockwise, the

larger will be the difference between the vibrato effect applied to each voice. In its leftmost position

there is no added error and all the voices are played with exactly the same vibrato effect.

4.17 The Arpeggiator Module

The Arpeggiator module allows one to play sequentially all the

notes that are played on the keyboard. In other words, arpeggios

are played rather than chords. The modules allows one to produce

a wide range of arpeggios and rhythmic patterns and to sync the

effects to the tempo of an external sequencer.

4.17.1 Arpeggio Patterns

The arpeggio pattern is set by the combination of the value of the

Range, Span and Order controls. The Range control is used to select

the number of octaves across which the pattern will be repeated. When the range is set to 0, there is

no transposition and only the notes currently depressed on the keyboard are played. If set to a value

between 1 and 4 (its maximum value), the notes played are transposed and played sequentially, over

a range of one or more octaves depending on the value of the Range parameter. The direction of

the transposition is set with the Span drop-down menu. This parameter can be adjusted to Low for

downwards transposition, to High for upwards transposition or Wide for transposing both upwards

and downwards. Finally, the Order control sets the order in which the notes are played, therefore

determining the arpeggio pattern. When set to Forward, the notes are played from the lowest to the

highest. When set to Backward the notes will be played from the highest to the lowest. In the two

last modes, Rock and Roll exclusive and Rock and Roll inclusive, the note will be played forward

from the lowest to the highest and then backward from the highest down to the lowest. When using

the RnR exclusive mode, the highest and the lowest notes will not be repeated when switching

direction but in RnR inclusive mode these notes will be repeated. Finally, in Chord mode, all the

notes are played at once.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS String Studio VS-1 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS String Studio VS-1 Manual

Product: