Manual A.Caminetti Flat (page 10 of 30) (English)

813873

Zoom out

Zoom in

1/30

4.1.

First check that there is no large quantity of ash in the burning chamber. This would cause hot

particles to fall from the ﬁreplace insert into the room when adding wood.

Place into the upper part of inserted wood (Fig. 7b), between the small pieces of wood,

thestated ignition piece then ignite it.

FIG. 7A FIG. 7B

Open the door of the ﬁreplace and on the bottom of the chamber place the dose of fuel

recommended for your type of the ﬁreplace insert against the rear wall. First place the

larger pieces of wood, then smaller pieces (Fig. 7a).

COMMISSIONING, BURNING PHASE AND REGULATION OF AIR SUPPLY

4. OPERATION OF FIREPLACE INSERTS

1. Set the handle for regulation of the air supply for burning to the maximum

This ensure a sufﬁcient supply of air for ignition.

4. Close the door and observe the fire until it is fully burning.

5. If the file is burned and the whole dose of fuel is burning, set the regulation of the air

supply into the central position (Fig. 8) to achieve the optimal output .

If the burning did not start, repeat the step No. 4.

If it is not necessary, do not open the door of the fireplace and do not interfere with the burning Leave

the dose of the fuel to burn out. Add the next dose in the heat phase (active burning with flames

terminated). Slowly open the door to prevent the escape of smoke into the room and add the dose of

the fuel to your fireplace .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of A.Caminetti Flat in the language / languages: English as an attachment in your email.

The manual is 16.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

A.Caminetti Flat Manual

Product: