654494
20
Zoom out
Zoom in
Previous page
1/26
Next page
3M 1999 3M Multimedia Projector MP8750 15
6-2. Replacing Projection Lamp
The metal halide lamp of the projector has a limited lifetime of approximately 2000 hours. If the projected image appears
dark or a red lamp life indicator bar displays during projector startup, you should change the lamp and air filter.
üü Important Note
This lamp contains mercury. Consult your local
hazardous waste regulations and
dispose of this lamp in a proper manner.
Caution
Always unplug the projector when changing the
lamp. There are high voltage parts inside the cabinet
that may cause electric shock.
Caution
Allow the projector to cool down for 30 minutes.
Lamp and adjacent metal parts become extremely hot
and can cause burns to your fingers.
1. Press the Standby/On button on the operator touch panel or remote control.
Wait for the fan motor to cycle off.
2.
Turn the main power switch to OFF and unplug the projector power cord.
3.
Set the projector on a sturdy surface with the front of the projector facing you.
4.
Press and hold the lamp door button (1) with your index finger. Slide your finger to the right and depress the lock tab
(2). Pull outward on the lamp door (4) to hinge it to the right side and access the lamp cartridge (5).
5.
Unscrew two retaining screws (3) securing the lamp cartridge (5).
6.
Grasp handle (6) and carefully pull the lamp cartridge (5) out of the projector.
7.
Carefully insert the new lamp cartridge (5) and secure with retaining screws (3).
8.
Close the lamp door (4) tightly until the lock tab (2) slides into the locked position.
9.
Go to the Advanced Setup menu and reset the lamp life display to zero.
Figure 6-2. Changing the lamp cartridge
Downloaded From projector-manual.com 3M Manuals
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m MP8750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m MP8750 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of 3m MP8750

3m MP8750 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info