534678

3Dprintingsystems UP Plus Manual

37
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
When paused you can “Withdraw” and “Extrude” filament.
the extruder and platform heater working, it is not suggested to pause for long periods of
time.
• Status bar:
The bottom status bar shows the current layer that is currently being printed
and the remaining time to complete the job.
• Intilise Switch:
By holding down the
print job, bring
the platform down and then put the printer into sleep mode.
Print Options:
Speed: Fine, Normal or Fast
. This simply determines the speed at which the printe
general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast
speed can be problematic as the printer can vibrate to the extent that print quality is affected. For
large surface area parts, the Fine
part and the corners are therefore more likely to lift a little bit.
UnSolid Model:
This function is useful for printing ST
file is a fully encl
osed surface
surfaces.
If your file is not perfect, this option should allow you to print it anyway.
TIP:
Once the print has started, you can unplug the
stored in the printer’s internal memory, so the
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
When paused you can “Withdraw” and “Extrude” filament.
Warning:
By pausing keeps
the extruder and platform heater working, it is not suggested to pause for long periods of
The bottom status bar shows the current layer that is currently being printed
and the remaining time to complete the job.
By holding down the
front switch on the printer, will
the platform down and then put the printer into sleep mode.
. This simply determines the speed at which the printe
general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast
speed can be problematic as the printer can vibrate to the extent that print quality is affected. For
large surface area parts, the Fine
setting can be problematic as the printer takes longer to print the
part and the corners are therefore more likely to lift a little bit.
This function is useful for printing ST
L
files that are not perfect. A perfect STL
osed surface
(water tight)
, with no holes in the surface skin, and no overlapping
If your file is not perfect, this option should allow you to print it anyway.
Once the print has started, you can unplug the
USB cable from the
PC. The print
stored in the printer’s internal memory, so the
computer is no longer required.
Troubleshooting
By pausing keeps
the extruder and platform heater working, it is not suggested to pause for long periods of
The bottom status bar shows the current layer that is currently being printed
abort the current
the platform down and then put the printer into sleep mode.
. This simply determines the speed at which the printe
r moves. As a
general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast
speed can be problematic as the printer can vibrate to the extent that print quality is affected. For
setting can be problematic as the printer takes longer to print the
files that are not perfect. A perfect STL
, with no holes in the surface skin, and no overlapping
If your file is not perfect, this option should allow you to print it anyway.
PC. The print
job is
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info