534678

3Dprintingsystems UP Plus Manual

36
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
Please ensure the following points are taken care of
Connect the 3D printer,
initialis
properly on the virt
ual platform of the
model (the software will, generally, tell you if there is not enough material when you begin the print)
If not, change the reel to a
new one.
For large models results can be im
option on the “3D Print” menu and the printer begins to heat the platform.
to 105°
C before beginning to print.
Click menu “3D Print->
Print”
printing parameters. Click “
OK
(Windows version)
Options During Printing:
• Stop All:
By pressing “Stop All” or the “Stop Print” icon will terminate the current print.
You can reprint the last job by clicking “Tools” and “Print Again”
the software looses track of material used.
• Pause Print:
Clicking “Pause Print” wi
This is a handy feature to change colours of filament, insert objects into your print.
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
Please ensure the following points are taken care of
before printing:
initialis
e it, and set up the printing system.
Load the model and place it
ual platform of the
software window. Check if the
re is enough
model (the software will, generally, tell you if there is not enough material when you begin the print)
new one.
For large models results can be im
proved by preheating the build platform. Click the “Preheat”
option on the “3D Print” menu and the printer begins to heat the platform.
Let the platform get up
C before beginning to print.
Print”
, and the print dialog box pops up. Choose “
Preferences
OK
” to begin to print.
(Windows version)
(Mac version)
Options During Printing:
By pressing “Stop All” or the “Stop Print” icon will terminate the current print.
You can reprint the last job by clicking “Tools” and “Print Again”
. By stopping the print,
the software looses track of material used.
Clicking “Pause Print” wi
ll pause the print job, and bring the platform down.
This is a handy feature to change colours of filament, insert objects into your print.
Troubleshooting
Load the model and place it
re is enough
material for the
model (the software will, generally, tell you if there is not enough material when you begin the print)
.
proved by preheating the build platform. Click the “Preheat”
Let the platform get up
Preferences
” to set the
By pressing “Stop All” or the “Stop Print” icon will terminate the current print.
. By stopping the print,
ll pause the print job, and bring the platform down.
This is a handy feature to change colours of filament, insert objects into your print.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info