534678

3Dprintingsystems UP Plus Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
Fixing STL Files:
If you load a model and parts of it are highlighted in red, then the model h
some errors.
The Up software has an option that attempts to fix models with bad surfaces. Under
the “Edit” menu you will see a “Fix” option. Select the model with inverted surfaces, and click the
“Fix” option to try and fix it.
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
errors use the option in the print screen called “UnSolid Model” and just print it.
Merging models:
Several separate models can be merged into a single file by using the “Merge”
option from the “Edit” menu. Simply open all the models you want to merge and arrange them the
way you want on the platform and click on the “Merge”
components will be saved as a single STL file
3.2.3 View
Options
To observe the target model
in different ways
Rotate:
Press the middle mouse button and move
served from different angles.
Pan: Press Ctrl and the
middle mouse button at the same time and move
the view to pan.
You can also use the arrow keys to pan the view.
Scale:
Rotate the mouse wheel
View:
The system has 8 preset standard views
Click
the View button on the toolbar (the startup value for the View button is
options:
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
If you load a model and parts of it are highlighted in red, then the model h
The Up software has an option that attempts to fix models with bad surfaces. Under
the “Edit” menu you will see a “Fix” option. Select the model with inverted surfaces, and click the
Also saving the model as
a UP3 file, then reopening the file can also
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
errors use the option in the print screen called “UnSolid Model” and just print it.
Several separate models can be merged into a single file by using the “Merge”
option from the “Edit” menu. Simply open all the models you want to merge and arrange them the
way you want on the platform and click on the “Merge”
option. When you then save th
components will be saved as a single STL file
.
Options
in different ways
, use the mouse to control the view.
Press the middle mouse button and move
the mouse: The view
can be
middle mouse button at the same time and move
the
mouse
You can also use the arrow keys to pan the view.
Rotate the mouse wheel
: The view gets zoomed in or out.
The system has 8 preset standard views
stored under the “View” button on the toolbar
the View button on the toolbar (the startup value for the View button is
“Fit"
Troubleshooting
If you load a model and parts of it are highlighted in red, then the model h
as
The Up software has an option that attempts to fix models with bad surfaces. Under
the “Edit” menu you will see a “Fix” option. Select the model with inverted surfaces, and click the
a UP3 file, then reopening the file can also
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
Several separate models can be merged into a single file by using the “Merge”
option from the “Edit” menu. Simply open all the models you want to merge and arrange them the
option. When you then save th
e file, all the
can be
rotated and ob-
mouse
: This causes
stored under the “View” button on the toolbar
.
“Fit"
) to find these
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info