534678

3Dprintingsystems UP Plus Manual

24
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
Move the mouse pointer onto
presented in a floating w
indow, as
(Windows version)
TIP:
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
for more information.
Unloading the model: click
the
load” on the toolbar or click
the
appear. C
hoose unload the model or
want to remove all of them).
Saving the model: C
hoose the model, then
size is 12%~18% of the original STL
transfer files.
Note on STL files:
For a model to print correctly, all the faces of the models need to have their
normal facing outwards. The U
The default colour used by the software when opening a model is a light grey/pink co
normals
are facing the wrong way, then the model is coloured in red.
or saving it as an UP3 file and reopening it.
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
the model, and click the left mouse key. Some m
odel
indow, as
shown below:
(Mac version)
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
the
left mouse button on the model to select it
(Pink)
the
right mouse button while over the model
and a context menu will
hoose unload the model or
unload all model
s (if you have more than one file open and
hoose the model, then
click “Save”. The file is saved in
UP3 format
size is 12%~18% of the original STL
file. This is a convenient format
for users to
For a model to print correctly, all the faces of the models need to have their
normal facing outwards. The U
P software uses colour Red to indicate a
problem with a
The default colour used by the software when opening a model is a light grey/pink co
are facing the wrong way, then the model is coloured in red.
Try fixing it with the Fix tool
or saving it as an UP3 file and reopening it.
Troubleshooting
odel
information is
(Mac version)
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
(Pink)
, and click “Un-
and a context menu will
s (if you have more than one file open and
UP3 format
and its
for users to
archive or
For a model to print correctly, all the faces of the models need to have their
problem with a
model.
The default colour used by the software when opening a model is a light grey/pink co
lour. If the
Try fixing it with the Fix tool
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info