Manual 3Dprintingsystems UP Plus (page 20 of 56) (English)

534678

Zoom out

Zoom in

1/56

UP Plus

3D Printer User Manual

3.1.6 Setting the

platform

This section is pro

bably the most important of the entire manual

Please read it carefully to ensure that you understand the

vital for

successful 3D printing.

To print successfully, the

platform

folded over) from the nozzle. As each printer is slightly different, this distance needs to be cal

brated before starting to print.

To work

out the correct nozzle distance, please follow th

Click “3D Print” and click

“Maint

Windows version

In the text box, type in the height to which you want the

platform

to move to, and click the “To” button. In the

above example, the

platform

UP Plus

has a print height of 1

Check the distance between the nozzle and the

If, for example, the

platform

away from the nozzle, increase the number

click the “To” button.

As the

nozzle

start increasing the number in the text box by

0.2

mm increments and click the “To” button. Repea

until you get to within 0.2mm of the nozzle.

way to check the distance between the nozzle and

form

is to fold a piece of paper in two (Which will make

it about 0.2mm thick) and use that as a spacer to gauge

the distance between the

nozzle and

Now click “Set to Nozzle Height”.

Troubleshooting

3D Printer User Manual

v 2013.6.10

platform

Height

bably the most important of the entire manual

and only needs to be done seldom

Please read it carefully to ensure that you understand the

platform

height setup procedure, as it is

successful 3D printing.

platform

should be set to start at a distance of 0.2mm (A piece of paper

folded over) from the nozzle. As each printer is slightly different, this distance needs to be cal

brated before starting to print.

out the correct nozzle distance, please follow th

ese steps:

“Maint

enance”, the below dialogue box will open.

MAC version

In the text box, type in the height to which you want the

to move to, and click the “To” button. In the

platform

will move to 134mm. The

has a print height of 1

35 to 138mm.

Note: You do not want to crash the

the nozzle, so increase the height in smaller and

smaller increments as you get closer to the

nozzle. If you do crash the

nozzle, it is best to

initialis

Check the distance between the nozzle and the

platform.

platform

appears to be about 2mm

away from the nozzle, increase the number

by 1mm and

As the

platform gets closer to the

start increasing the number in the text box by

mm increments and click the “To” button. Repea

t this

until you get to within 0.2mm of the nozzle.

TIP: An easy

way to check the distance between the nozzle and

plat-

is to fold a piece of paper in two (Which will make

it about 0.2mm thick) and use that as a spacer to gauge

nozzle and

platform.

TIP:

If you find you get lifting at a later

stage, increase the

platform

Now click “Set to Nozzle Height”.

Troubleshooting

and only needs to be done seldom

height setup procedure, as it is

should be set to start at a distance of 0.2mm (A piece of paper

folded over) from the nozzle. As each printer is slightly different, this distance needs to be cal

Note: You do not want to crash the

platform into

the nozzle, so increase the height in smaller and

smaller increments as you get closer to the

nozzle. If you do crash the

platform into the

initialis

e again.

If you find you get lifting at a later

platform

height.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

3Dprintingsystems UP Plus Manual

Product: