430900
39
Zoom out
Zoom in
Previous page
1/50
Next page
Backing up and Restoring the Extended Segment of Boot ROM Program 37
Upgrading the entire
Boot ROM program
1 Enter Boot menu (see Boot MenuBoot Menu), select <7> for the 3000 DSL to turn
to Boot ROM operation menu.
2 Select <1> in the Boot ROM operation sub-menu to download the Boot ROM
program with XModem. The Router provides you with several speeds. The
subsequent operation steps are the same as those described in “I”.
If the all Boot ROM program fails during upgrade, it cannot be restored on site.
Therefore, only when necessary can you upgrade the whole Boot ROM, besides,
you must upgrade under the guide of technical support personnel.
Upgrading the extended
segment of Boot ROM
program
1 Enter Boot menu (see Boot MenuBoot Menu), select <7> for the 3000 DSL to turn
to Boot ROM operation menu.
2 Select <2> in the operation sub-menu to upgrade the extended segment of Boot
ROM program with XModem. The Router provides you with several speeds. The
subsequent operation steps are the same as those described in “I.
Backing up and
Restoring the
Extended Segment of
Boot ROM Program
Backup the extended segment of Boot ROM Program in FLASH
1 Enter Boot menu (see Boot MenuBoot Menu), select <7> to turn to Boot ROM
operation menu.
2 Select <4> in the operation sub-menu to copy the current extended segment of
Boot ROM program into the FLASH, and then the following information will be
displayed in the terminal interface if the restoring operation is successful.
Writing to FLASH.Please wait...####
Backuping Boot ROM program to FLASH successed!
3 When the sub-menu appears again, select <5> to exit the Boot menu and proceed
to execute the router’s main software.
Restore the extended segment of Boot ROM program from FLASH
In case that faults occur to the extended segment of the Boot ROM program that
is in use, or you upgrade the extended segment wrongly, you can restore the
extended segment saved in FLASH into the Boot ROM by doing the following:
1 Enter Boot menu (see Boot MenuBoot Menu), select <7> to turn to Boot ROM
operation menu.
2 Select <3> in the operation sub-menu to restore Boot ROM from FLASH, and then
the following information will be displayed if the restoring operation is successful.
Writing to Boot ROM.Please wait...######
Restoring Boot ROM program successful!
3 When the sub-menu appears again, select <5> to exit the Boot menu and proceed
to execute the router’s main software.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3com router 3035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3com router 3035 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info