430900
31
Zoom out
Zoom in
Previous page
1/50
Next page
Configuration Fundamentals of the Router 29
In the console terminal, you can see the startup interface after the router is
powered on.
After the Power-On Self-Test (POST), you are prompted to press <Enter>. When
“[Router]” is displayed, you can proceed to configure the router.
Startup Process The following describes the startup process for all Router 3000 DSL Family
products.
Router starts booting... (V2.00)
Starting at 0x1500000...
********************************************
* *
* 3Com Series Routers Boot ROM, V9.00 *
* *
********************************************
Copyright(C) 1997-2003 by 3Com Corporation CO.
Compiled at 17:11:06, Aug 19 2003.
Testing memory...OK!
64M bytes SDRAM
8192k bytes flash memory
Hardware Version is MTR 2.0
CPLD Version is CPLD 1.0
Press Ctrl-B to enter Boot Menu
System is self-decompressing................................
....................OK!
System is starting...
Starting at 0x10000...
If no registration authentication is set, press <Enter> and this information is
prompted:
<Router>
It means the system enters the user view and is ready for your configuration.
Configuration
Fundamentals of the
Router
In general, the configuration steps are as follows:
1 Before configuring a router, you should make the networking requirements clear
and specific, including networking purpose, the role of the router in the network,
division of subnets, WAN type and transmission medium, network security policy
and reliability.
2 Draw a clear and integrated networking diagram.
3 Configure the IP addresses or IPX network numbers of all the interfaces on the
router on the basis of subnet division.
4 Configure the routes. If it is necessary to start the dynamic routing protocol, you
should also configure the related operating parameters for the protocol.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3com router 3035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3com router 3035 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info