430900

3com router 3035 Manual

24
Zoom out
Zoom in
Previous page
1/50
Next page
22 CHAPTER 3: INSTALLING THE ROUTER
The routers also have rigorous demands on the content of salts, acids and sulfides
in the air. These harmful gases will speed up the aging processes of certain parts
and cause a more rapid rusting of the metal parts. The equipment room should be
protected from the invasion of harmful gases such as SO2, H2S, NO2, NH3, and
Cl2, the value limits of which are shown below:
ESD Preventative
Requirements
Although many anti-static considerations have been given to 3000 DSL Family,
damage to the router’s circuit or even the whole equipment is still posible when
the static electricity exceeds the tolerance threshold.
In the communication network to which the routers are connected, static
induction mainly comes from:
■ External electric fields such as outdoor high voltage power lines or thunder.
■ Internal environment like flooring materials or the whole equipment
structure.
The following should be considered to safeguard the equipment against the ESD:
■ Make sure that the equipment and the floor are well grounded.
■ Make sure that dust-proof measures are taken.
■ Maintain an appropriate humidity and temperature.
■ Wear an ESD-preventive wrist strap and uniform when contacting the circuit
board.
■ Place the uninstalled circuit board on the antistatic workbench, with its face
upward, or put it into the static shielding bag.
■ When observing or removing the uninstalled circuit board, please touch the
edge of the circuit board, and avoid contacting the devices on it.
Electromagnetic
Environment
Requirements
The interference sources, no matter where they come from, affect the routers with
capacitance coupling, inductance coupling, radiation of electromagnetic wave,
common impedance (including the grounding system) or conducting line (power
line, signal line and transmission line etc.). The following should be considered:
■ Take effective measures to prevent the power system from being interfered
with by the power grid system.
■ Keep the router far away from the radio launcher, radar launcher, and
high-frequency devices working in high currents.
■ Use electromagnetic shielding when necessary.
Table 3 Value limits for harmful gas content in equipment room
Gas Average (mg/m
3
) Max. (mg/m
3
)
SO
2
0.2 1.5
H
2
S 0 0.03
NO
2
0.04 0.15
NH
3
0.05 0.15
Cl
2
0.01 0.3
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3com router 3035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3com router 3035 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info