477802

2N Helios Manual

32
Zoom out
Zoom in
Previous page
1/42
Next page
has read all that relates to the current user position in the programming menu. The
timeout can be prolonged – see the chart.
Switch Password Programming
Each switch can be controlled with up to 10 different passwords that are listed in the
Helios memory. Passwords can be added to the list using functions 811 and 821 and
deleted with functions 812 and 822 individually. The default status is a single password
in the list, namely 00 for switch 1 and 11 for switch 2. These two special passwords
cannot be entered from the Helios keypad. To cancel them, you have to remove them
from the list:
or
Function 997 deletes the entire password list for both switches including the
passwords 00 and 11. Function 999 deletes the entire password list for both switches
too but recovers the passwords 00 and 11 and the service password 12345.
Password Selection Restrictions
Controlling the switches by phone, you can enter the password without any starting
and terminating characters and the password length is not limited. Helios has to verify
after every character received whether the password is complete or not. Therefore:
make sure that no password is identical with the beginning of another password.
• Should you use such confusing passwords for switch control, you have to enter the
longer password (by phone) with asterisks at the beginning and end.
• If Helios refuses to store a password, it means that the switch password list is full,
or the password has already been entered.
• The switch password may not be identical with any Arrival/Departure, Day/Night, or
service password.
• For password selection tips see the Instructions for Keypad Use.
Deleting All Passwords, All Memories, Complete Initialisation
The following three functions facilitate your programming by clearing all previous
settings:
997 - deletes the entire password list for both switches including passwords 00 and 11.
998 - deletes memories of all buttons (01 - 54) plus Arrival/Departure and Day/Night
passwords.
999 - clears the whole memory and resets the default values (see the chart).
Protection against Unintentional Deletion
The above functions need no special parameter but must be protected against
unintentional initiation. Therefore, enter the service password as the function parameter.
Warning: Full initialisation takes a few seconds, Helios sends a continuous tone while
memory clearing. Functions 997 and 998 take a little less time and are signalled by a
continuous tone too.
The button memories can be deleted individually too – just enter a “blank” while
programming. For example:
clears memory 1 of button 01.
32
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 2N Helios at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 2N Helios in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info