477802
31
Zoom out
Zoom in
Previous page
1/42
Next page
8. Programming
All Helios parameters, including the keypad ones, are set remotely using any tone-
dialling telephone set (or a mobile phone). First call Helios and enter the programming
mode. The access to this mode is service password protected.
A voice menu is available in the programming mode and so you need not use this
manual to program standard parameters. The menu is stored in the Helios memory in
the default language. Having entered the full parameter or memory number, you can
hear how the parameter has been programmed, thus checking the programmed
numbers for correctness.
All parameters are stored safely in the non-volatile EEPROM memory. The memory
capacity does not limit the count or length of numbers, passwords, etc. This means that
altogether 324 memories for 16-digit telephone numbers, 54 Arrival/Departure password
memories, 20 switch password memories, etc. are available.
Tip - Before You Start Programming
Write or print the values to be programmed to minimise the risk of error. Moreover,
this gives you an idea of what you have programmed. Make sure that programming
is not barred (JP1 jumper) – refer to the PCB Description subsection.
Entering Programming Mode
You can enter the programming mode only during an
incoming call (telephone –
Helios call). The programming barring jumper must not be mounted. To get into the
programming mode, enter the service password in the format password (do not
forget to enter the asterisks before and behind the password!). The service password is
12345 by default and can be changed ,. If you enter the password correctly, the voice
menu is launched. Now you can start programming.
Programming Procedure
You can set parameters in any order and as many times as you wish. To change a
parameter use the following command:
Function number
parameter
A three-digit function number is assigned to every parameter to be programmed
and to every memory (refer to the Programming Chart). This number indicates to Helios
which parameter to change, and
is used as "Enter". When it is entered, Helios
repeats the parameter (or memory) number and reads the current contents (excluding
passwords). Now you can enter new data – of variable meaning and length depending
on the function selected (refer to the Programming Chart). Finally, press
again for
confirmation. Helios confirms the data saving. Repeat this procedure for each
parameter.
Programming Error
Any wrong value can be re-programmed by another command (immediately or any
time later).
If you make a typing error, cancel the entered value with
. Then you can re-enter
the whole number.
If you enter an incorrect function number or parameter value, Helios sends a refusal
signal and you have to start with the function number again.
If you do not press any button within a predefined timeout, Helios sends a hang-up
signal and hangs up. The timeout is 5 seconds; every
character is followed by 30
seconds for you to think over your setting. The 5-second limit starts when Helios
31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 2N Helios at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 2N Helios in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info