477802
11
Zoom out
Zoom in
Previous page
1/42
Next page
5. Function Description
5.1. From External User's View (Visitor)
Like normal Doorbells, Helios buttons are provided with labels the visitor finds the
appropriate button (e.g. Mr. Smith) and presses it this activates Helios to then dial the
number pre-programmed for under that button, the visitor can then hear the ringing tone
from the loudspeaker and the required (Mr. Smith‘s in this case) telephone is ringing. If
the Helios unit is connected to a telephone system you may be able to tag the port that
Helios is connected to so that you can see on the ringing phone that it is the Helios that
is calling. When the called party answers the call, the visitor and tenant can speak to
each other and If an electric lock is connected to Helios, the called person can open the
door by entering the correct password on the telephone keypad to activate the door or
barrier. When the caller hangs up, Helios detects the PBX or analogue line tone and
hangs up too. Helios also hangs up when it “hears” the busy tone or if the call takes
more time than pre-programmed to connect. You can pre-program the amount of time
that you have to speak into the microphone however when you are reaching the
programmed time the unit gives a warning tone 10 seconds before hanging up so that
the called party can extend the call if required.
Notes:
If the visitor presses
another button during the call, Helios hangs up for a few
seconds before dialling the new number.
If a button is pressed that has no number stored within it Helios picks up the line,
sends a refusal tone (refer to the Signals Overview) and hangs up.
If the visitor presses
the same button during the call, Helios may hang up (can be
programmed to stop this feature if required).
The above mentioned rules are only applied if the
Automatic Multiple Number
Dialling mode is OFF. For this special mode refer to the Automatic Multiple Number
Dialling section.
5.2. Function Description – Numerical Keypad Units
The 2ENTRY
®
- Helios basic units, Part Nos. 9135130K and 9135160K, are
equipped with a numerical keypad. The keypad provides a number of functions:
traditional code lock
features as if a normal telephone set
DTMF transmission during an outgoing call
substitution of up to 54 buttons
The keypad features a smart metal design and very favourable price to performance
ratio. For the description of the functions from the user‘s view see below.
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 2N Helios at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 2N Helios in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info