607219
38
Zoom out
Zoom in
Previous page
1/150
Next page
Chapter 2 How to Set Up Your Network
ZyWALL USG 20-2000 User’s Guide
38
Table 10 Ethernet, PPP, VLAN, Bridge and Policy Routing Screen Relationships
Since firmware version 3.00, the ZyWALL supports IPv6 configuration in these Ethernet, PPP,
VLAN, Bridge and Policy Route screens under Configuration > Network > Interface and
Configuration > Network > Routing. Basically, these are the same as the ones for IPv4
networks except the following differences:
You have to enable IPv6 globally in the CONFIGURATION > System > IPv6 screen to make
the IPv6 settings work.
•An Enable IPv6 setting - Select this in the screens listed above to enable the ZyWALL to be able
to send and receive IPv6 packets through the interface. Otherwise, the ZyWALL discards IPv6
packets flowing through the interface.
IPv6 Address Assignment - This section allows you to enable auto-configuration and configure
prefix delegation.
DHCPv6 Setting - This section allows you to configure the DHCPv6 role and the corresponding
settings for the interface.
2.6 How to Set Up IPv6 Interfaces For Pure IPv6 Routing
This example shows how to configure your ZyWALL Z’s WAN and LAN interfaces which connects two
IPv6 networks. ZyWALL Z periodically advertises a network prefix of 2006:1111:1111:1111::/64 to
the LAN through router advertisements.
Note: Instead of using router advertisement, you can use DHCPv6 to pass the network
settings to the computers on the LAN.
Figure 22 Pure IPv6 Network Example
SCREEN DESCRIPTION
Ethernet Configure this if any interface on the ZyWALL is connecting to an Ethernet network. Ethernet
interfaces are the foundation for defining other interfaces and network policies.
PPP Configure this if you need your service provider to provide an IP address through PPPoE or PPTP in
order to access the Internet or another network.
VLAN Configure this if you want to divide your physical networks into multiple VLANs, or your service
provider or an aggregated network needs the ZyWALL to recognize the VLAN tags in the packets
flowing through the ZyWALL.
Bridge Configure this if you want the ZyWALL to combine two or multiple network segments into one
single network. Although the ZyWALL is “transparent” in this mode, you can still apply security
checking on packets flowing through the ZyWALL.
Policy
Routing
Configure this if you want to override the ZyWALL’s default routing behavior in order to send
packets through the appropriate interface or VPN tunnel.
2006:1111:1111:1111::/64
IPv6
IPv6
Z
WAN
LAN
IPv6
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL ZyWALL USG 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL ZyWALL USG 20 in the language / languages: English as an attachment in your email.

The manual is 7,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL ZyWALL USG 20

ZyXEL ZyWALL USG 20 Quick start guide - English, German, French, Italian, Swedish, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info