796878
54
Zoom out
Zoom in
Previous page
1/434
Next page
Chapter 1 Introducing the Zyxel Device
VMG/XMG Series User’s Guide
54
1.4.3.1 Transceiver Installation
Use the following steps to install an SFP transceiver.
1Locate the transmit (Tx) and the receive (Rx) markings on the SFP+ module to identify the top.
2Insert the transceiver into the slot.
3Press the transceiver firmly until it clicks into place.
4The Zyxel Device automatically detects the installed transceiver. Check the LEDs to verify that it is
functioning properly.
5Close the transceiver’s latch (the latch styles vary).
6Connect the fiber optic cables to the transceiver.
1.4.3.2 Transceiver Removal
Use the following steps to remove an SFP transceiver.
1Remove the fiber optic cables from the transceiver.
2Open the transceiver’s latch (the latch styles vary).
3Pull the transceiver out of the slot.
1.4.4 Using the WLAN and WPS Buttons
If the wireless network is turned off, press the WiFi button. Check the WLAN/WPS LED on the front panel to
see if the wireless network is active.
You can also use the WPS button to quickly set up a secure wireless connection between the Zyxel
Device and a WPS-compatible client by adding one device at a time.
To activate WPS:
1Make sure the POWER LED is on and not blinking.
2Press the WPS button and release it.
3Press the WPS button on another WPS-enabled device within range of the Zyxel Device. The WLAN/WPS
LED flashes amber while the Zyxel Device sets up a WPS connection with the other wireless device.
4Once the connection is successfully made, the WLAN/WPS LED shines blue or green.
Note: If your Zyxel Device supports both 2.4 GHz and 5 GHz wireless networks, the connection
to the 2.4 GHz wireless network has priority.
To turn off the wireless network, press the WiFi button. The WLAN/WPS LED turns off when the wireless
network is off.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL XMG3927-B50A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL XMG3927-B50A in the language / languages: English as an attachment in your email.

The manual is 13.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info