730069
2
Zoom out
Zoom in
Previous page
1/4
Next page
Quick Start Guide
DANSK | NEDERLANDS | NORSK | SUOMI
SVENSKA
XGS1210-12
8-Port Gigabit Web Managed Switch
with 2-Port 2.5G/2-Port SFP+
Declaration of Conformity
Safety Warning
QSG
DoC
Switch
Package Contents
Support Information
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
See the User's Guide at www.zyxel.com for more information,
including customer support and safety warnings.
LEDs
PWR/SYS
Green
On - Power on.
Blinking - Starting up.
Off - Switch off.
Ports 1-8
LINK/ACT
Green On - 1000 Mbps connection ready.
Blinking - Data transmitting.
Amber On - 10/100 Mbps connection ready.
Blinking - Data transmitting.
Off - No Connection.
Green On - 1000 Mbps connection ready.
Blinking - Data transmitting.
Skye Blue On - 2.5 Gbps Connection Ready.
Blinking - Data transmitting.
Green On - 1000 Mbps connection ready.
Blinking - Data transmitting.
Blue On - 10 Gbps Connection Ready.
Blinking - Data transmitting.
Amber On - 100 Mbps connection ready.
Blinking - Data transmitting.
Off - No Connection.
Off - No Connection.
Ports 9-10
(Left LED)
(Right LED)
Ports 11-12
(Left LED)
(Right LED)
Tilslut til en relevant strømkilde.
Tilslut til et modem eller router der har internetadgang.
Sluit aan op een geschikte stroombron.
Sluit aan op een modem of router met internetverbinding.
Koble til en hensiktsmessig strømkilde.
Koble til et modem eller en ruter som har Internett-til-
gang.
Liitä laite yhteensopivaan virtalähteeseen.
Liitä laite modeemiin tai reitittimeen, josta on
Internet-yhteys.
Anslut till en lämplig strömkälla.
Anslut till ett modem eller en router som har internetåt-
komst.
1
2
1
2
1
2
1
2
1
2
Tilslut din computer til switchen ved brug af et
Ethernet-kabel. Din computer skal have en IP-adresse i
det samme undernet som switchen.
Start din webbrowser og gå til http://192.168.1.3. Indtast
1234 som adgangskode. Klik på SIGN IN (Log på).
Sluit uw computer aan op de Schakelaar met een
Ethernet-kabel. Uw computer dient een IP-adres te
hebben in hetzelfde subnet als de Schakelaar.
Open uw webbrowser en ga naar http://192.168.1.3. Voer
1234 in als wachtwoord. Klik op AANMELDEN.
Koble datamaskinen til bryteren ved hjelp av en
Ethernet-kabel. Datamaskinen må ha en IP-adresse i
samme subnett som bryteren.
Åpne nettleseren og gå til http://192.168.1.3. Angi 1234 som
passord. Klikk på LOGG PÅ.
Liitä tietokone kytkimeen Ethernet-kaapelilla.
Tietokoneen IP-osoitteen on oltava samassa aliverkossa
kytkimen IP-osoitteen kanssa.
Avaa selain ja siirry osoitteeseen https://192.168.1.3. Kirjoita
salasanaksi 1234. Valitse SIGN IN (KIRJAUDU).
Anslut datorn till switchen med en Ethernet-kabel. Datorn
måste ha en IP-adress i samma subnät som switchen.
Starta din webbläsare och gå till sidan http://192.168.1.3.
Skriv in 1234 som lösenord. Klicka på LOGGA IN.
3
4
3
4
3
4
3
4
3
4
DK
NO
FI
SE
NL
DK
NO
FI
SE
NL
Troubleshooting
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
(The default IP address is 192.168.1.3.)
Make sure your computer is in the same subnet as the Switch. If
you haven’t changed the default IP address, your computer IP
address should be in the 192.168.1.4 ~ 192.168.1.254 range.
Make sure you have entered the Password correctly. If you have
changed the Password and have forgotten it, you’ll have to reset
the Switch to its factory default.
(The default Password is 1234.)
A loop is detected.
A loop may happen in the following example situations:
1. The Switch is connected to another device in a loop state.
2. The Switch is connected to another device with two cables.
Loop Prevention is enabled by default. If a loop happens, the
Switch will block the port in a loop state. If a loop happens on
two ports, the Switch will block the higher-numbered port. For
example, if a loop happens on ports 4 and 5, the Switch will block
port 5, and its LED will be off. To restore a port in a loop state,
disconnect it, check the network connections, and reconnect it.
You can log into the Web Configurator. Go to System in the Web
Configurator to check your port status.
EU
https://support.zyxel.eu
International Power Adapter
Power Outlet
1
Back
11 Hardware Installation1
DC 12V
DC 12V
1
2
3
4
5
6
7 8
99
1100
1111
1122
LLiinn kk // AACC TT
110000 00 MM 1100 // 110000 MM
::
22 ..55GG 110000 00 MM 110000MM
1100GG 11000000MM
GLGI GLGI
Manage Your Device
2
Password : 1234 (default)
http://192.168.1.3
Switch IP:
192.168.1.3
PC IP:
192.168.1.4 ~ 192.168.1.254
Device Setting
3
4
Management
IP Address
Subnet Mask
DHCP client
Gateway
2
Front
Modem / Router
1
2
3
4
5
6
7 8
99
1100
1111
1122
LLiinn kk // AACC TT
110000 00 MM 1100 // 110000 MM
::
22 ..55GG 110000 00 MM 110000MM
1100GG 11000000MM
GLGI GLGI
SIGN IN
Log in
Password 1234
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL XGS1210-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL XGS1210-12 in the language / languages: All languages as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info