796883
42
Zoom out
Zoom in
Previous page
1/434
Next page
Chapter 1 Introducing the Zyxel Device
VMG/XMG Series User’s Guide
42
WLAN/WPS Green On The 2.4 GHz or 5 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 2.4 GHz or 5 GHz wireless clients.
Orange Blinking The Zyxel Device is setting up a WPS connection with a 2.4 GHz or 5 GHz
wireless client.
Off The 2.4 GHz or 5 GHz wireless network is not activated.
Phone1,
Phone2
Green On A SIP account is registered for the phone port.
Blinking A telephone connected to the phone port has its receiver off the hook or
there is an incoming call.
Orange On A SIP account is registered for the phone port and there is a voice message
in the corresponding SIP account.
Blinking A telephone connected to the phone port has its receiver off the hook and
there is a voice message in the corresponding SIP account.
Off The phone port does not have a SIP account registered.
USB Green On The Zyxel Device recognizes a USB connection through the USB slot.
Blinking The Zyxel Device is sending/receiving data to/from the USB device
connected to it.
Off The Zyxel Device does not detect a USB connection through the USB slot.
Table 12 VMG8623-T50A LED Descriptions
LED COLOR STATUS DESCRIPTION
Power Blue On The Zyxel Device is receiving power and ready for use.
Blinking The Zyxel Device is self-testing.
Red On The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking The Zyxel Device is upgrading firmware.
Off The Zyxel Device is not receiving power.
WAN Blue On One of the following connections is up.
•ADSL
•VDSL
Ethernet connection on the WAN.
Slow
Blinking
The ADSL/VDSL link is down, and the Zyxel Device is looking for an ADSL/
VDSL link.
Fast
Blinking
The Zyxel Device is initializing the ADSL/VDSL link.
Off There is no Ethernet connection on the WAN.
Internet Blue On Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The Zyxel Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Table 11 VMG8924-B10D LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG8825-Bx0C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG8825-Bx0C in the language / languages: English as an attachment in your email.

The manual is 13.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info