796880
336
Zoom out
Zoom in
Previous page
1/434
Next page
Chapter 26 VoIP Status
VMG/XMG Series User’s Guide
336
Call Type This field displays the call direction type of the current VoIP call.
Outgoing Call - It’s a SIP VoIP call made by local phone ports, and this SIP account is able to
issue a (SIP-based) call setup to the SIP account of remote peers for a VoIP call establishment.
This (SIP-based) call setup signal is sent to the SIP server first, and then the SIP server would relay it
to the target peer after correctly resolving and locating the target peer. During the call setup
(signaling) phase, Calling state is displayed in the Status field, and it turns to InCall state once
the call is successfully established.
Incoming Call - It’s a SIP VoIP call made or originated by remote SIP accounts to connect to this
local SIP account. One or more local phone ports can be configured to receive this type of call,
see the Incoming Number below, and all of them should begin to ring during the call setup
(signaling phase), see the Status above. Once some remote SIP accounts start to ring one local
phone, answer by off-hook to the call, and the call is successfully established. The other ringing
local phone ports will stop ringing and turning to InCall state in the Status field.
Internal Call - It’s a local VoIP call between two different local phone ports. No SIP signaling is
needed and thus no SIP server is involved to establish this type of call. This type of call is
established via the Internal and Non-SIP local setup signaling procedure between the call-
originating and call-terminating local phone ports. In general, one or more local phone ports
can be designed to receive this type of call, and once any of the ringing phones answer the
call, the other ringing ones will stop ringing. During the call setup phase (signaling phase),
Calling state is displayed in Status field, and turns to InCall state once the call is successfully
established.
Codec This field displays what voice codec is being used for a current VoIP call through a phone port.
From Phone Port
Type
This field displays the phone ports type used to originate, start, or create the current VoIP call.
Two possible type values will be displayed here:
SIP - For the current call which is categorized as Incoming Call in the Call Type filed, this field will
show the type SIP.
FXS - As for the other cases: Outgoing Call and Internal Call, this field will show the
corresponding local phone port type: FXS, the legacy analog phone port on the device.
To Phone Port
Type
This field displays the phone ports type used to receive the current VoIP call. Three possible type
values will be displayed here:
SIP - For the current call which is categorized as Outgoing Call in the Call Type field, this field will
show the type SIP.
FXS and Unknown - As for the other cases: Incoming Call and Internal Call, this field will show the
corresponding local phone port type: FXS, the legacy analog phone port on the device. While
the call is established, this field shows Unknown during the call setup phase (signaling phase).
This is because one or more local phone ports can be configured or designed to receive these
two types of calls, see the Call Type above, and the local phone port will answer the call that
hasn’t been determined yet at that time.
Peer Number This field displays the SIP address of the party that is currently engaged in a VoIP call through a
phone port.
Phone Status
Phone This field displays the name of a phone port on the Zyxel Device.
Outgoing
Number
This field displays the SIP address that you use to make calls on this phone port.
Incoming
Number
This field displays the SIP address that you use to receive calls on this phone port.
Table 142 System Monitor > VoIP Status (continued)
LABEL DESCRIPTION
336


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG8823-Bx0B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG8823-Bx0B in the language / languages: English as an attachment in your email.

The manual is 13.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info