688688

ZyXEL VMG8623-T50A Manual

350
Zoom out
Zoom in
Previous page
1/421
Next page
Chapter 37 Time Settings
VMG/XMG Series User’s Guide
350
The following table describes the fields in this screen.
Table 156 Maintenance > Time
LABEL DESCRIPTION
Current Date/Time
Current Time This field displays the time of your Zyxel Device.
Each time you reload this page, the Zyxel Device synchronizes the time with the time server.
Current Date This field displays the date of your Zyxel Device.
Each time you reload this page, the Zyxel Device synchronizes the date with the time server.
Time and Date Setup
First ~ Fifth Time
Server Address
Select an NTP time server from the drop-down list box.
Otherwise, select Other and enter the IP address or URL (up to 29 extended ASCII characters
in length) of your time server.
Select None if you don’t want to configure the time server.
Check with your ISP/network administrator if you are unsure of this information.
Time Zone
Time zone Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Daylight Savings Daylight Saving Time is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the evening.
Active Click this switch to enable or disable Daylight Saving Time. When the switch goes to the right
, the function is enabled. Otherwise, it’s not.
Start Rule Configure the day and time when Daylight Saving Time starts if you enabled Daylight Saving.
You can select a specific date in a particular month or a specific day of a specific week in a
particular month. The Time field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of March.
Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local time. So in
the United States, set the day to Second, Sunday, the month to March and the time to 2 in the
Hour field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time
zones in the European Union start using Daylight Saving Time at the same moment (1 A.M.
GMT or UTC). So in the European Union you would set the day to Last, Sunday and the month
to March. The time you select in the o'clock field depends on your time zone. In Germany for
instance, you would select 2 in the Hour field because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
End Rule Configure the day and time when Daylight Saving Time ends if you enabled Daylight Saving.
You can select a specific date in a particular month or a specific day of a specific week in a
particular month. The Time field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each time
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United
States you would set the day to First, Sunday, the month to November and the time to 2 in the
Hour field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would set the day to Last, Sunday, and the
month to October. The time you select in the o'clock field depends on your time zone. In
Germany for instance, you would select 2 in the Hour field because Germany's time zone is
one hour ahead of GMT or UTC (GMT+1).
Cancel Click Cancel to exit this screen without saving.
Apply Click Apply to save your changes.
… 350 …


Need help? Post your question in this forum.

Forumrules
1

Forum

zyxel-vmg8623-t50a

Reset search

  • Bhag bhabTouch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour. be deleted aTouch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.fter 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.ghg GB ggygbgg Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.b Submitted on 29-9-2022 at 03:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG8623-T50A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG8623-T50A in the language / languages: English as an attachment in your email.

The manual is 14,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info