Manual ZyXEL VMG8623-T50A (page 325 of 421) (English)

688688

325

Zoom out

Zoom in

Previous page

1/421

Next page

Chapter 26 VoIP Status

VMG/XMG Series User’s Guide

325

Registration This field displays the current registration status of the SIP account.

Disabled - The SIP account is not enabled. You can enable it in VoIP > SIP > SIP Account by

pressing the Edit icon in the Modify field, and then selecting the Enable SIP Account check box.

Registered - The SIP account is registered with a SIP server and can be used to make a VoIP call.

The account must first be enabled in VoIP > SIP > SIP Account and registered by enabling

Register Action.

Unregistered - This status will show if the last attempt to register the SIP account with the SIP

server failed or if Register Action is set to unregistered.

Registration

Time

This field displays the last time the Zyxel Device successfully registered the SIP account. The field

is blank if the Zyxel Device has never successfully registered this account.

URI This field displays the account number and service domain of the SIP account. You can change

these in the VoIP > SIP screens.

Message

Waiting

This field indicates whether or not there are any messages waiting for the SIP account.

Last Incoming

Number

This field displays the last number that called the SIP account. The field is blank if no number has

ever dialed the SIP account.

Last Outgoing

Number

This field displays the last number the SIP account called. The field is blank if the SIP account has

never dialed a number.

Call Status

Account This column displays each SIP account in the Zyxel Device.

Duration This field displays how long the current call has lasted.

Status This field displays the current state of the phone call.

Idle - There are no current VoIP calls, incoming calls or outgoing calls being made.

Dial - The callee’s phone is ringing.

Ring - The phone is ringing for an incoming VoIP call.

Process - There is a VoIP call in progress.

DISC - The callee’s line is busy, the callee hung up or your phone was left off the hook.

Call Type This field displays the call direction type of the current VoIP call.

Outgoing Call - It’s a SIP VoIP call made by local phone ports, and this SIP account is able to

issue a (SIP-based) call setup to the SIP account of remote peers for a VoIP call establishment.

This (SIP-based) call setup signal is sent to the SIP server first, and then the SIP server would relay it

to the target peer after correctly resolving and locating the target peer. During the call setup

(signaling) phase, Calling state is displayed in the Status field, and it turns to InCall state once

the call is successfully established.

Incoming Call - It’s a SIP VoIP call made or originated by remote SIP accounts to connect to this

local SIP account. One or more local phone ports can be configured to receive this type of call,

see the Incoming Number below, and all of them should begin to ring during the call setup

(signaling phase), see the Status

above. Once some remote SIP accounts start to ring one local

phone, answer by off-hook to the call, and the call is successfully established. The other ringing

local phone ports will stop ringing and turning to InCall state in the Status field.

Internal Call - It’s a local VoIP call between two different local phone ports. No SIP signaling is

needed and thus no SIP server is involved to establish this type of call. This type of call is

established via the Internal and Non-SIP local setup signaling procedure between the call-

originating and call-terminating local phone ports. In general, one or more local phone ports

can be designed to receive this type of call, and once any of the ringing phones answer the

call, the other ringing ones will stop ringing. During the call setup phase (signaling phase),

Calling state is displayed in Status field, and turns to InCall state once the call is successfully

established.

Table 141 System Monitor > VoIP Status (continued)

LABEL DESCRIPTION

1

Bhag bhabTouch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour. be deleted aTouch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.fter 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.ghg GB ggygbgg Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.b Submitted on 29-9-2022 at 03:00
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for ZyXEL VMG8623-T50A at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG8623-T50A in the language / languages: English as an attachment in your email.

The manual is 14,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info