796868
43
Zoom out
Zoom in
Previous page
1/86
Next page
Chapter 12 Remote Management
VMG4005-B50A/B60A User’s Guide
43
The following table describes the fields in this screen.
12.3 Trust Domain
Use this screen to view a list of public IP addresses which are allowed to access the VMG through the
services configured in the Maintenance > Remote Management > MGMT Services screen.
Click Maintenance > Remote Management > Trust Domain to open the following screen.
Note: If this list is empty, all public IP addresses cannot access the VMG from the WAN through
the specified services.
Table 17 Maintenance > Remote Management > MGMT Services
LABEL DESCRIPTION
WAN Interface
used for services
Select Any_WAN to have the VMG automatically activate the remote management service
when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the VMG activate the
remote management service when the selected WAN connections are up.
Service This is the service you may use to access the VMG.
HTTP provides a non secured way.
HTTPS is the secured version of HTTP, it makes sure that your data cannot be read during
transmission.
FTP is the most common way of communication between two devices.
TELNET provides a way to control your VMG remotely.
SSH prevents leakage of data during remote management. Additionally, it can encrypt all
transmitted data.
PING is a diagnostic tool that can check if your VMG is connected to the Internet.
LAN Select the Enable check box for the corresponding services that you want to allow access to the
VMG from the LAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to the
VMG from all WAN connections.
Trust Domain Select the Enable check box for the corresponding services that you want to allow access to the
VMG from the trusted hosts configured in the Maintenance > Remote MGMT > Trust Domain
screen.
If you only want certain WAN connections to have access to the VMG using the corresponding
services, then clear WAN, select Trust Domain and configure the allowed IP address(es) in the
Trust Domain screen.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes back to the VMG.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG4005 - B60A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG4005 - B60A in the language / languages: English as an attachment in your email.

The manual is 1.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info