796875
379
Zoom out
Zoom in
Previous page
1/434
Next page
Chapter 42 Diagnostic
VMG/XMG Series User’s Guide
379
The following table describes the labels in this screen.
42.6 The OAM Ping Screen
Click Maintenance > Diagnostic > OAM Ping to open the screen shown next. Use this screen to perform
an OAM (Operation, Administration and Maintenance) F4 or F5 loopback test on a PVC. The Zyxel
Device sends an OAM F4 or F5 packet to the DSLAM or ATM switch and then returns it to the Zyxel
Device. The test result then displays in the text box. ATM sets up virtual circuits over which end systems
communicate. The terminology for virtual circuits is as follows:
Figure 247 Virtual Circuit Topology
Table 165 Maintenance > Diagnostics > 802.3ah
LABEL DESCRIPTION
IEEE 802.3ah Ethernet OAM Click this switch to enable or disable the Ethernet OAM on the specified interface.
When the switch goes to the right , the function is enabled. Otherwise, it’s not.
Interface Select the interface on which you want to enable the IEEE802.3ah.
OAM ID Type a positive integer to identify this node.
Auto Event Click this switch to detect link status and send a notification when an error (such as
errors in symbol, frames, or seconds) is detected. Otherwise, disable this and you will
not be notified. When the switch goes to the right , the function is enabled.
Otherwise, it’s not.
Features Select Variable Retrieval so the Zyxel Device can respond to requests for
information, such as requests for Ethernet counters and statistics, about link events.
Select Link Events so the Zyxel Device can interpret link events, such as link fault and
dying asp.Link events are set in event notification PDUs (Protocol Data Units), and
indicate when the number of errors in a certain given interval (time, number of
frames, number of symbols, or number of errored frame seconds) exceeds a
specified threshold. Organizations may create organization-specific link event TLVs
as well.
Select Remote Loopback so the Zyxel Device can accept loopback control PDUs to
convert VMG into loopback mode.
Select Active Mode so the Zyxel Device initiates OAM discovery, send information
PDUs; and may send event notification PDUs, variable request/response PDUs, or
loopback control PDUs.
Apply Click this button to save your changes.
Virtual Channel (VC) Logical connections between ATM devices
Virtual Path (VP) A bundle of virtual channels
Virtual Circuits A series of virtual paths between circuit end points
379


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG3625-T50A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG3625-T50A in the language / languages: English as an attachment in your email.

The manual is 13.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info