796875
315
Zoom out
Zoom in
Previous page
1/434
Next page
Chapter 23 Voice
VMG/XMG Series User’s Guide
315
SIP Service Domain
The SIP service domain of the VoIP service provider is the domain name in a SIP URI. For example, if the
SIP address is 1122334455@VoIP-provider.com, then “VoIP-provider.com” is the SIP service domain.
SIP Registration
Each Zyxel Device is an individual SIP User Agent (UA). To provide voice service, it has a public IP address
for SIP and RTP protocols to communicate with other servers.
A SIP user agent has to register with the SIP registrar and must provide information about the users it
represents, as well as its current IP address (for the routing of incoming SIP requests). After successful
registration, the SIP server knows that the users (identified by their dedicated SIP URIs) are represented by
the UA, and knows the IP address to which the SIP requests and responses should be sent.
Registration is initiated by the User Agent Client (UAC) running in the VoIP gateway (the Zyxel Device).
The gateway must be configured with information letting it know where to send the REGISTER message,
as well as the relevant user and authorization data.
A SIP registration has a limited lifespan. The User Agent Client must renew its registration within this
lifespan. If it does not do so, the registration data will be deleted from the SIP registrar's database and
the connection broken.
The Zyxel Device attempts to register all enabled subscriber ports when it is switched on. When you
enable a subscriber port that was previously disabled, the Zyxel Device attempts to register the port
immediately.
Authorization Requirements
SIP registrations (and subsequent SIP requests) require a username and password for authorization. These
credentials are validated via a challenge / response system using the HTTP digest mechanism (as
detailed in RFC 3261, "SIP: Session Initiation Protocol").
SIP Servers
SIP is a client-server protocol. A SIP client is an application program or device that sends SIP requests. A
SIP server responds to the SIP requests.
When you use SIP to make a VoIP call, it originates at a client and terminates at a server. A SIP client
could be a computer or a SIP phone. One device can act as both a SIP client and a SIP server.
SIP User Agent
A SIP user agent can make and receive VoIP telephone calls. This means that SIP can be used for peer-
to-peer communications even though it is a client-server protocol. In the following figure, either A or B
can act as a SIP user agent client to initiate a call. A and B can also both act as a SIP SIP user agent to
receive the call.
315


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG3625-T50A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG3625-T50A in the language / languages: English as an attachment in your email.

The manual is 13.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info