796872
378
Zoom out
Zoom in
Previous page
1/434
Next page
Chapter 42 Diagnostic
VMG/XMG Series User’s Guide
378
42.5 The 802.3ah (OAM) Screen
Click Maintenance > Diagnostic > 803.ah to open the following screen. Link layer Ethernet OAM
(Operations, Administration and Maintenance) as described in IEEE 802.3ah is a link monitoring protocol.
It utilizes OAM Protocol Data Units (OAM PDU’s) to transmit link status information between directly
connected Ethernet devices. Both devices must support IEEE 802.3ah.
Figure 246 Maintenance > Diagnostic > 802.3ah
Maintenance
Domain (MD)
Level
Select a level (0-7) under which you want to create an MA.
MEG ID Type a descriptive name for the MEG ID (Maintenance Entity Group ID).
MD Name Type a descriptive name for the MD (Maintenance Domain).
MA ID Type a descriptive name to identify the Maintenance Association.
802.1Q VLAN ID Type a VLAN ID (1-4094) for this MA.
Local MEP ID Enter the local Maintenance Endpoint Identifier (1~8191).
CCM Select Enable to continue sending MEP information by CCM (Connectivity Check Messages).
When CCMs are received the VMG will always process it, whether CCM is enabled or not.
Remote MEP ID Type the remote Maintenance Endpoint Identifier (1~8191).
Test the connection to another Maintenance End Point (MEP)
Destination
MAC Address
Type the target device’s MAC address to which the Zyxel Device performs a CFM loopback and
linktrace test.
Test Result
Loopback
Message (LBM)
This shows Pass if a Loop Back Messages (LBMs) responses are received. If LBMs do not get a
response it shows Fail.
Linktrace
Message (LTM)
This shows the MAC address of MEPs that respond to the LTMs.
Apply Click this button to save your changes.
Send Loopback Click this button to have the selected MEP send the LBM (Loop Back Message) to a specified
remote end point.
Send Linktrace Click this button to have the selected MEP send the LTMs (Link Trace Messages) to a specified
remote end point.
Table 164 Maintenance > Diagnostic > 802.1ag (continued)
LABEL DESCRIPTION
378


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG1312-B10D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG1312-B10D in the language / languages: English as an attachment in your email.

The manual is 13.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info