679722
386
Zoom out
Zoom in
Previous page
1/414
Next page
Chapter 47 Product Specifications
VES1724-56 User’s Guide
386
The following list, which is not exhaustive, illustrates the standards supported in the Switch.
IP Multicast With IP multicast, the Switch delivers IP packets to a group of hosts on
the network-not everybody. In addition, the Switch can send packets to
Ethernet devices that are not VLAN-aware by untagging (removing the
VLAN tags) IP multicast packets.
STP (Spanning Tree
Protocol) / RSTP (Rapid
STP)/MSTP (Multiple
Spanning Tree Protocol)
(M)(R)STP detects and breaks network loops and provides backup links
between switches, bridges or routers. It allows a Switch to interact with
other (M)(R)STP-compliant switches in your network to ensure that
only one path exists between any two stations on the network.
Loop Guard Use the loop guard feature to protect against network loops on the
edge of your network.
IP Source Guard Use IP source guard to filter unauthorized DHCP and ARP packets in
your network.
Link Aggregation Link aggregation (trunking) is the grouping of physical ports into one
logical higher-capacity link. You may want to trunk ports if for example,
it is cheaper to use multiple lower-speed links than to under-utilize a
high-speed, but more costly, single-port link.
Port Authentication and
Security
For security, the Switch allows authentication using IEEE 802.1x with
an external RADIUS server and port security that allows only packets
with dynamically learned MAC addresses and/or configured static MAC
addresses to pass through a port on the Switch.
Authentication and
Accounting
The Switch supports authentication and accounting services via
RADIUS and TACACS+ Authentication servers.
Device Management Use the Web Configurator or commands to easily configure the rich
range of features on the Switch.
Port Cloning Use the port cloning feature to copy the settings you configure on one
port to another port or ports.
Syslog The Switch can generate syslog messages and send it to a syslog
server.
Firmware Upgrade Download new firmware (when available) from the ZyXEL web site and
use the Web Configurator, CLI or an FTP/TFTP tool to put it on the
Switch.
Note: Only upload firmware for your specific model!
Configuration Backup &
Restoration
Make a copy of the Switch’s configuration and put it back on the Switch
later if you decide you want to revert back to an earlier configuration.
VDSL Template At the time of writing, you can configure one VDSL line profile and
VDSL channel profile in one VDSL template on the Switch.
Table 183 Standards Supported
STANDARD DESCRIPTION
RFC 826 Address Resolution Protocol (ARP)
RFC 867 Daytime Protocol
RFC 868 Time Protocol
RFC 894 Ethernet II Encapsulation
RFC 1112 IGMP v1
RFC 1155 SMI
RFC 1157 SNMPv1: Simple Network Management Protocol version 1
RFC 1213 SNMP MIB II
Table 182 Firmware Specifications
FEATURE DESCRIPTION
386


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VES1724-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VES1724-56 in the language / languages: English as an attachment in your email.

The manual is 10,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info