65664

ZyXEL Prestige 2000W v.2 Manual

2
Zoom out
Zoom in
Previous page
1/6
Next page
Date: 2005-04-06
2 (2)
since the VIA headers are added again to the outgoing response. See section 2.4 below on
how to limit the size of IP packets in the Internet Gate.
1. Connect the power cable from your ZyXEL cradle to your power outlet.
2. Switch on the ZyXEL handset by holding down the
key during a few seconds.
If it does not respond, the battery might not be charged. Charge the batteries and try
again later
1.1 Two basic ways to setup your phone / client
You can use your SIP phone/client in two basic ways:
(A) registered at an operator’s
2
SIP server, or
(B) registered at your Internet Gate, using the Internet Gate as the SIP server.
(A) If you will register your client at an operator’s SIP server, you should skip section 1.4
below and instead follow the SIP setup descriptions given by your operator. In this case
you do not need to do any configuration of SIP accounts on your Internet Gate. Also, make
sure to turn off any NAT or firewall traversal tricks such as STUN, TURN, ICE in your
phone. The Internet Gate is SIP transparent by default and will forward outgoing and
incoming SIP traffic.
(B) If the Internet Gate will be used as SIP server, you should setup user accounts on it.
The Internet Gate supports SIP server registrations both from the LAN and the WAN (e.g.
Internet). By default the Internet Gate will grant all SIP server registrations from the LAN
without any authentication. In order to control who is allowed and who is disallowed to
register, users from the WAN (e.g. Internet) must have a pre-configured account registered
on the Internet Gate. Our recommendation is that you setup user accounts on the Internet
Gate for all users – whether LAN users or WAN users - since this gives you administration
control and give the users maximum flexibility. Also, if you have the SIP Switch software
upgrade installed the setup of user accounts makes it easy to assign a short extension
number to each user. Please refer to www.intertex.se/upfiles/SIPSwitchDescription.pdf
for
more info on setting up short extension numbers with the SIP Switch.
1.2 Configuring the wireless network on the Internet Gate
1. Surf into your Internet Gate by entering http://192.168.0.1 in your web browser’s
URL- field.
2. Below Configurations: choose Network.
3. Verify that the wireless setting AIR used as is not disabled and that the DHCP
server box is checked.
4. Choose Wireless Settings
5. Enter a suitable wireless network name in the text box Network Name
(SSID), e.g. IGSIP.
6. It is recommended that you in some way limit the access to your wireless network
since your LAN otherwise is completely open and vulnerable to attacks. There are
several ways to limit the wireless access: a) using WEP encryption with a associated
2
Same as ITSP (Internet Telephony Service Provider)
INTERTEX DATA AB
Rissneleden 45, SE-174 44, Sweden, Tel: +46 8 6282828, Fax: +46 8 6286414, www.intertex.se
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Prestige 2000W v.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Prestige 2000W v.2 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info