730110
36
Zoom out
Zoom in
Previous page
1/82
Next page
Chapter 7 Wireless LAN
PLA5236 User’s Guide
36
7.5 Wireless Security
The screen varies depending on what you select in the Security Mode field.
7.5.1 No Security
Select No Security to allow wireless clients to communicate with the access points without any data
encryption.
Note: If you do not enable any wireless security on your PLA, your network is accessible to any
wireless networking device that is within range.
802.11 Mode You can select from the following:
802.11b: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate
with the PLA. In this mode, all wireless devices can only transmit at the data rates supported
by IEEE 802.11b.
802.11g: allows IEEE 802.11g compliant WLAN devices to associate with the Device. IEEE
802.11b compliant WLAN devices can associate with the PLA only when they use the short
preamble type.
802.11bg: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate
with the PLA. The PLA adjusts the transmission rate automatically according to the wireless
standard supported by the wireless devices.
802.11n: allows IEEE 802.11n compliant WLAN devices to associate with the PLA. This can
increase transmission rates, although IEEE 802.11b or IEEE 802.11g clients will not be able to
connect to the PLA. I
802.11gn: allows either IEEE 802.11g or IEEE 802.11n compliant WLAN devices to associate
with the PLA. The transmission rate of your PLA might be reduced.
802.11 bgn: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to
associate with the PLA. The transmission rate of your PLA might be reduced.
Security
Security Mode Select Static WEP, WPA-PSK, or WPA2-PSK to add security on this wireless network. The wireless
clients which want to associate to this network must have same wireless security settings as this
device. After you select to use a security, additional options appears in this screen. See Section
7.5 on page 36 for detailed information on different security modes. Or you can select No
Security to allow any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Apply Click Apply to save your changes back to the PLA.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 13 Network > Wireless LAN 2.4G or 5G> General
LABEL DESCRIPTION
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL PLA5236 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL PLA5236 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL PLA5236

ZyXEL PLA5236 Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info