730111
32
Zoom out
Zoom in
Previous page
1/67
Next page
Chapter 4 The Configuration Utility
PLA Series User’s Guide
32
4.4 Configuration Screen
Use the Configuration screen to see which devices are recognized by your powerline network, to
configure your PLA and to set up a secure powerline network by changing the powerline network
name. This screen opens up when you launch the utility.
Select a powerline adapter from the drop-down box.
The information provided in the following table reflects transmission rate information about the powerline
adapters which communicate in your powerline network.
The powerline adapters listed in this table are all the powerline adapters in your powerline network except the
selected powerline adapter. In other words, if the Local powerline adapter is selected, then this table will
display the rates of transmission from the powerline adapter connected to the computer running the
configuration utility to all the Remote powerline adapters.
Site This field displays:
Local, if it is the PLA directly connected to the computer running the configuration
utility.
Remote, if it is a PLA in your powerline network but not directly connected to the
computer running the configuration utility.
MAC Address This field displays the MAC address of your powerline adapter. The MAC address of your
powerline adapter can be found by looking at the label on your device. It consists of six
pairs of hexadecimal characters (hexadecimal characters are “0-9” and “a-f”). In the case
of the PLA, this label is on the bottom of the device.
Transmit Rate
(Mbps)
This field displays how fast information is sent from the selected powerline adapter to this
powerline adapter. The rate is given in the following format: “application data transmission
rate / raw data transmission rate”. Application data reflects more accurately how fast
devices are transmitting application relevant traffic (for example Internet Protocol (IP)
traffic). Raw data refers to the whole payload of the packets transmitted across the
powerline network.
Receive Rate
(Mbps)
This field displays how fast information is received from the selected powerline adapter to
this powerline adapter. The rate is given in the following format: “application data
transmission rate / raw data transmission rate. Application data reflects more accurately
how fast devices are transmitting application relevant traffic (for example Internet Protocol
(IP) traffic). Raw data refers to the whole payload of the packets transmitted across the
powerline network.
Table 9 Network Info Screen (List) (continued)
LABEL DESCRIPTION
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL PLA5206 v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL PLA5206 v2 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL PLA5206 v2

ZyXEL PLA5206 v2 Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info