607189
47
Zoom out
Zoom in
Previous page
1/63
Next page
Chapter 6 Troubleshooting
PLA Series User’s Guide
47
3 Make sure that all your powerline adapters are HomePlug AV compliant. Check the package it came
in or ask your vendor. This PLA can not detect earlier versions of HomePlug powerline adapters such
as HomePlug 1.0 or 1.0.1. (Although they can coexist on the same electrical wiring without
interfering with each other.)
4 Make sure that the powerline adapters on your network are all on the same electrical wiring.
Connect another powerline adapter into an outlet close to your PLA’s power outlet. They are
probably now on the same electrical wiring. Check the HomePlug ( ) light. If it now lights up your
powerline adapter was probably previously on separate electrical wiring. Ask an electrician for more
information on the electrical wiring in your building.
5 Make sure that you do not have a power meter between powerline adapters. Powerline signals
cannot pass this.
The POWER and HomePlug light blink at the same time.
You have pressed the RESET/ENCRYPT button for more than three seconds. Try setting up a
connection again, this time pressing the RESET/ENCRYPT buttons on both devices for less than
three seconds.
6.2 Configuration Utility Problems
The ZyXEL PLA Series Configuration utility displays an error during installation.
Make sure your computer is using the supported operating system. See Section 3.1.1 on page 19
and/or Section 3.2.1 on page 25 for more information.
The ZyXEL PLA Series Configuration utility does not display all or any of my devices.
Inspect the LEDs on your PLA and make sure that the ETHERNET and HomePlug LEDs are on or
blinking. See Section 1.2 on page 7 for troubleshooting LED related problems.
Check you are using the latest version utility. Earlier version utilities cannot communicate with
PLAs using the latest firmware. If you do not have the latest utility, download it from the ZyXEL
website.
If you are running another tool such as the Firmware Detection Tool, the utility will not detect
your local device.
If your computer has more than one network interface card (NIC), make sure you select the right
NIC to which the PLA is connected in the utility’s Configuration screen.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL PLA4111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL PLA4111 in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info