Manual ZyXEL P-2812HNU-F1 (page 46 of 83) (English)

566454

Zoom out

Zoom in

1/83

When the 802.1x is enabled, the authenticator controls the port authorization

state by using the following control parameters. The following three authentication

control parameters are applied in the Wireless AP.

1. Force Authorized: Disables the 802.1x and causes the port to transit to the

authorized state without any authentication exchange required. The port transmits

and receives the normal traffic without the 802.1x-based authentication of client.

This is the default port control setting. While the AP is setup as Force Authorized,

the Wireless client (supported 802.1x client or none-802.1x client) can always access

the network.

2. Force Unauthorized: Causes the port to remain in the unauthorized state, ignoring

all attempts by the client to authenticate. The authenticator cannot provide

authentication services to the supplicants through the port. While AP is setup as

Force Unauthorized, Wireless clients (supported 802.1x client or none-802.1x client)

never have the access for the network.

3. Auto: Enables the 802.1x and causes the port to begin in the unauthorized state,

allowing only the EAPOL frames to be sent and received through the port. The

authentication process begins, when the link state of port transitions from down to

up or when an EAPOL-start frame is received requests the identity of the client and

begins relaying authentication messages between supplicant and the authentication

server. Each supplicant attempting to access the network is uniquely identified by

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL P-2812HNU-F1 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ZyXEL P-2812HNU-F1 Manual

Product: