679723
326
Zoom out
Zoom in
Previous page
1/332
Next page
Appendix B Legal Information
OLT2406 User’s Guide
326
Registration
Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at
www.us.zyxel.com for North American products.
Safety Warnings
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASS 1
PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11.
PRODUIT CONFORME SELON 21 CFR 1040.10 ET 1040.11.
Fuse Warning! Replace a fuse only with a fuse of the same type and rating.
The length of exposed (bare) power wire should not exceed 10 mm.
Warning: This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably
installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable
grounding is available.
Use ONLY power wires of the appropriate wire gauge (see Section 1.8.1.1 on page 28 for details) for your device. Connect it to a power
supply of the correct voltage (see Section 46.1 on page 315 for details).
Do NOT allow anything to rest on the power wires and do NOT place the product where anyone can walk on the power wires.
Do NOT use the device if a power wire is damaged as it might cause electrocution.
If the power wires are damaged, remove them from the power source and the device.
Do NOT attempt to repair the power wires. Contact your local vendor to order a new one.
Warning! To avoid risk of electric shock, remove only one card at a time and do not place fingers or objects inside the chassis. Cover
empty slots with slot covers.
Energy Hazard Warning! Remove all metal jewelry, watches, and so on from your hands and wrists before serving this device.
Fan Module Warning! Use the fan module handles when pulling out or pushing in the fan module. Be careful not to put fingers or
objects inside the fan module.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication lines cord.
Product installation should be performed only by trained service personnel. Read and follow all warning notices and instructions
provided on the product, product packaging, and in the documentation.
Do not use this product near water, for example, in a wet basement or near a swimming pool.
Avoid using these products (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from
lightning.
Do not use the device outside, and make sure all the connections are indoors. There may be a remote risk of electric shock from
lightning.
The RJ-45 jacks are not used for telephone line connection.
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and
Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used
electrical and electronic equipment should be treated separately.
326


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL OLT2406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL OLT2406 in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info