679723
22
Zoom out
Zoom in
Previous page
1/332
Next page
Chapter 1 System Introduction
OLT2406 User’s Guide
22
1.3.2 Uplink and Subtending Slots
The management switching card has 4 slots compliant with IEEE 802.3ae for Enhanced Small Form-
factor Pluggable (SFP+) transceivers (10 Gigabit Ethernet or 1 Gigabit Ethernet) for backbone or
subtending connections. It also has 2 SFP slots for backbone or subtending connections.
Transceivers are not included. See Section 1.3.5 on page 23 for specifications of the supported
optical transceivers. See Section 2.4 on page 35 for how to install transceivers.
To avoid possible eye injury, do not look into an operating fiber-optic
transceivers connectors.
You can change transceivers while the OLT is operating. Use different transceivers to connect to
backbone Ethernet switches with different types of fiber-optic connectors.
1.3.2.1 Uplink and Subtending Modes
The uplink and subtending slots can function in either subtending or uplink mode. Connect a port in
uplink mode to a backbone Ethernet switch or router. The management switching card allows traffic
between the ports in uplink mode and the GPON or GE ports on the line cards.
Use subtending mode to daisy-chain OLTs or Ethernet switches. The OLT allows traffic between the
ports in subtending mode and the ports in uplink mode. The OLT blocks traffic between the ports in
subtending mode and the subscriber ports on the line cards.
1.3.3 CONSOLE Port Connections
Connect the male RJ-45 end of the RS-232 console cable to the console port of the management
switching card. Connect the female end to a serial port (COM1, COM2 or other COM port) of your
computer. See Section 4.1.1 on page 47 for terminal emulation software settings to use for access.
1.3.4 Management Switching Card Supported Transceivers
The management switching card supports SFP+ transceivers compliant with the SFP MSA standard
(SFF-8472) and using an LC duplex receptacle. Here is the list of supported transceivers.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL OLT2406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL OLT2406 in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info