679723
21
Zoom out
Zoom in
Previous page
1/332
Next page
Chapter 1 System Introduction
OLT2406 User’s Guide
21
1.3.1 Management Switching Card Ports
Note: Install the management switching card before you make the hardware connections.
See Section 2.3 on page 31.
Table 2 Management Switching Card LED Descriptions
LED COLOR STATUS DESCRIPTION
SFP 1 ~ 2
LINK
Green On A 1 Gbps Ethernet link is up.
Off The Ethernet link is down.
SFP 3 ~ 6
LINK
Green On A 10 Gbps or 1 Gbps Ethernet link is up.
Off The Ethernet link is down.
SFP ACT Green Blinking The slot is transmitting or receiving Ethernet traffic.
Off The connection is idle.
MGMT Amber Blinking The port is transmitting/receiving to/from a 100 Mbps Ethernet network.
On A 100 Mbps Ethernet link is up.
Off The Ethernet link is down.
Green Blinking The port is transmitting/receiving to/from a 10 Mbps Ethernet device.
On A 10 Mbps Ethernet link is up.
Off The Ethernet link is down.
SYS/ALM Green Blinking The system is initializing.
On The management switching card is on and functioning properly.
Off The management switching card is not receiving power, is not ready or has
malfunctioned.
Red On An alarm has been detected on the OLT. Examples of an alarm on the OLT
are when the OLT’s voltage or temperature is outside of the normal range.
Off The OLT has not detected an alarm on itself.
PWR Green On The management switching card is receiving power from the chassis.
Off The management switching card is not receiving power from the chassis.
Table 3 Management Switching Card Port Descriptions
LABEL DESCRIPTION
SFP1~SFP2 Use these 1 GbE SFP slots for uplink and subtending connections.
SFP3~SFP6 Use these 10G/1GbE SFP+ slots for uplink and subtending connections.
MGMT Connect this RJ-45 Ethernet port to an Ethernet network for out-of-band management (a
separate channel for management that is not part of the channels that are usually used for
data transfer).
CONSOLE Connect this RJ-45 female connector to a computer for local management.
ACO Press the Alarm Cut Off (ACO) button to cancel an alarm. This stops the sending of the alarm
signal current. This is useful in stopping an alarm if you have the alarm output connector pins
connected to a visible or audible alarm. The alarm entry remains in the system.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL OLT2406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL OLT2406 in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info