796991

ZyXEL Nebula LTE7461-M602 Manual

201
Zoom out
Zoom in
Previous page
1/361
Next page
Chapter 11 Network Address Translation (NAT)
Nebula Mobile Router User’s Guide
201
The following table describes the labels in this screen.
11.4 DMZ
Use this screen to specify the IP address of a default server to receive packets from ports not specified in
the Port Triggering screen. The DMZ (DeMilitarized Zone) is a network between the WAN and the LAN
that is accessible to devices on both the WAN and LAN with firewall protection. Devices on the WAN
can initiate connections to devices on the DMZ but not to those on the LAN.
You can put public servers, such as email, web, and FTP servers, on the DMZ to provide services on both
the WAN and LAN. To use this feature, you first need to assign a DMZ host. Click Network Setting > NAT >
DMZ to open the DMZ screen.
Note: Use an IPv4 address for the DMZ server.
Note: Enter the IP address of the default server in the Default Server Address field, and click
Apply to activate the DMZ host. Otherwise, clear the IP address in the Default Server
Address field, and click Apply to deactivate the DMZ host.
Table 74 Network Setting > NAT > Port Triggering: Add or Edit
LABEL DESCRIPTION
Active Click to enable (blue switch) or disable (gray switch) to activate or deactivate the rule.
Service Name Enter a name to identify this rule using keyboard characters (A – Z, a – z, 1 – 2 and so on).
WAN Interface Select a WAN interface for which you want to configure port triggering rules.
Trigger Start Port The trigger port is a port (or a range of ports) that causes (or triggers) the Zyxel Device to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Trigger End Port Type a port number or the ending port number in a range of port numbers.
Trigger Protocol Select the transport layer protocol from TCP, UDP, or TCP/UDP.
Open Start Port The open port is a port (or a range of ports) that a server on the WAN uses when it sends out a
particular service. The Zyxel Device forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Open End Port Type a port number or the ending port number in a range of port numbers.
Open Protocol Select the transport layer protocol from TCP, UDP, or TCP/UDP.
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes.
… 201 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Nebula LTE7461-M602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Nebula LTE7461-M602 in the language / languages: English as an attachment in your email.

The manual is 10.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info