796991
115
Zoom out
Zoom in
Previous page
1/361
Next page
Chapter 7 Broadband
Nebula Mobile Router User’s Guide
115
7.5 Cellular APN
Click Network Setting > Broadband > Cellular APN to display the following screen. Use this screen to
manage the APNs that Zyxel Device is connected to.
Network
Monitoring
Use this field to allow Zyxel Device to try reconnecting to the base station if the cellular
connection is lost. After the third try, the Zyxel Device will reboot to try to reconnect with the base
station. The LED will blink red to indicate that it is rebooting.
Note: This feature only works if there is a previous cellular connection between the
Zyxel Device and the base station.
Proxy ARP Feature
Proxy ARP Enable this to set your Zyxel Device as a server to handle ARP queries from different subnets. The
Zyxel Device will offer Zyxel Device’s own MAC address as an reply.
FQ_Codel Setting
FQ_Codel Select this field to enable FQ_Codel on the Zyxel Device. Clear this field if your network does not
have much real-time traffic.
Use Fair Queuing with Controlled Delay (FQ_Codel) to reduce delays in traffic that could affect
real-time communications, such as video conferencing, live streaming, and voice over Internet
phone calls
FQ_Codel limits traffic throughput, by dropping traffic so as to reduce buffer queuing that causes
delays. It does not prioritize traffic by type.
APN Manual
Mode
Disable this to have the Zyxel Device configure the APN (Access Point Name) of a cellular
network automatically. Otherwise, Click this to enable ( ) and enter the APN manually in the
field below.
APN This field allows you to display the Access Point Name (APN) in the profile.
Enter the Access Point Name (APN) provided by your service provider. Connections with different
APNs may provide different services (such as Internet access or MMS (Multi-Media Messaging
Service)) and charging method.
You can enter up to 64 printable ASCII characters. Spaces are allowed.
Username Enter the user name. You can enter up to 64 printable ASCII characters. Spaces are allowed.
Password Enter the password associated with the user name above. You can enter up to 64 printable ASCII
characters. Spaces are allowed.
Authentication
Type
Select the type of authentication method peers use to connect to the Zyxel Device in cellular
connections.
In Password Authentication Protocol (PAP) peers identify themselves with a user name and
password. In Challenge Handshake Authentication Protocol (CHAP) additionally to user name
and password the Zyxel Device sends regular challenges to make sure an intruder has not
replaced a peer. Otherwise select PAP/CHAP or None.
PDP Type Select IPv4 if you want the Zyxel Device to run IPv4 (Internet Protocol version 4 addressing system)
only.
Select IPv4/IPv6 if you want the Zyxel Device to run both IPv4 and IPv6 (Internet Protocol version 4
and 6 addressing system) at the same time.
Apply Click this to save your changes.
Cancel Click this to exit this screen without saving.
Table 29 Network Setting > Broadband > Cellular WAN (continued)
LABEL DESCRIPTION
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Nebula LTE7461-M602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Nebula LTE7461-M602 in the language / languages: English as an attachment in your email.

The manual is 10.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info