679719
161
Zoom out
Zoom in
Previous page
1/206
Next page
Chapter 16 Troubleshooting
NBG6817 User’s Guide
161
5 If the problem continues, contact the vendor.
16.3 NBG6817 Access and Login
I don’t know the IP address of my NBG6817.
6 The default IP address of the NBG6817 in Router Mode is 192.168.1.1. If the NBG6817 obtains a WAN IP
address in the same subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be
changed to 10.0.0.1 automatically. See Auto-IP Change on page 75 for more information.
The default IP address of the NBG6817 in Access Point Mode is 192.168.1.2.
7 If you changed the IP address and have forgotten it, you might get the IP address of the NBG6817 in
Router Mode by looking up the IP address of the default gateway for your computer. To do this in most
Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway might be the IP address of the NBG6817 (it depends on the network), so enter this IP address in
your Internet browser.
8 If your NBG6817 in Access Point Mode is a DHCP client, you can find your IP address from the DHCP
server. This information is only available from the DHCP server which allocates IP addresses on your
network. Find this information directly from the DHCP server or contact your system administrator for
more information.
9 Reset your NBG6817 to change all settings back to their default. This means your current settings are lost.
See Section 16.5 on page 164 in the Troubleshooting for information on resetting your NBG6817.
I forgot the password.
1 The default password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See Section 16.5 on page 164.
I cannot see or access the Login screen in the Web Configurator.
1 Make sure you are using the correct IP address.
2 The default IP address of the NBG6817 in Router Mode is 192.168.1.1. If the NBG6817 obtains a WAN IP
address in the same subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be
changed to 10.0.0.1 automatically. See Auto-IP Change on page 75 for more information.
The default IP address of the NBG6817 in Access Point Mode is 192.168.1.2.
If you changed the IP address (Section 12.4 on page 114), use the new IP address.
If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I don’t
know the IP address of my NBG6817.
161


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NBG6817 - ARMOR Z2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NBG6817 - ARMOR Z2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NBG6817 - ARMOR Z2

ZyXEL NBG6817 - ARMOR Z2 User Manual - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info