679716
69
Zoom out
Zoom in
Previous page
1/203
Next page
Chapter 10 WAN
NBG6617 User’s Guide
69
IPv6 DNS Server
This is available only when you select IPv4 Only in the IPv4/IPv6 field and set IPv6 Tunneling to 6RD,
6in4 or 6to4.
First DNS Server
Second DNS Server
Third DNS Server
Specify the DNS server IPv6 address assigned by the ISP.
IPv6 Address
This section is NOT available when you select IPv4 Only in the IPv4/IPv6 field.
Obtain an IP
Address
Automatically(DHCP
)
Select this option if you want to obtain an IPv6 address from a DHCPv6 server.
•Select DUID-LL (Default) to have the NBG6617 use DUID-LL (DUID Based on
Link-layer Address) for identification when exchanging DHCPv6 messages.
•Select DUID-LLT to have the NBG6617 use DUID-LLT (DUID Based on Link-layer
Address Plus Time) for identification when exchanging DHCPv6 messages.
Static IP Address Select this option if you have a fixed IPv6 address assigned by your ISP.
IPv6 Address Enter the IPv6 address assigned by your ISP.
Prefix length Enter the address prefix length to specify how many most significant bits in an IPv6
address compose the network address.
IPv6 Default
Gateway
Enter the IPv6 address of the next-hop gateway. The gateway helps forward packets to
their destinations.
Link Local Only Select this option to use the link-local address which uniquely identifies a device on the
local network (the LAN).
IPv6 DNS Server
This is available only when you select Dual Stack or IPv6 Only in the IPv4/IPv6 field.
First DNS Server
Second DNS Server
Third DNS Server
Select Obtained From ISP to have the NBG6617 get the IPv6 DNS server addresses
from the ISP automatically.
Select User-Defined and enter the IPv6 DNS server address assigned by the ISP to
have the NBG6617 use the IPv6 DNS server addresses you configure manually.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IPv6 address of a computer in order to access it.
Multicast Setup
Multicast Setup Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the WAN
to the LAN.
Select None to disable this feature. This may cause incoming traffic to be dropped or
sent to all connected network devices.
Auto-Subnet Configuration
Enable Auto-IP-
Change Mode
Select this option to have the NBG6617 change its LAN IP address to 10.0.0.1 or
192.168.1.1 accordingly when the NBG6617 gets a dynamic WAN IP address in the
same subnet as the LAN IP address.
Select this option to have the NBG6617 change its LAN IP address to 10.0.0.1 or
192.168.1.1 accordingly when the NBG6617 gets a DNS server IP address in the same
subnet as the LAN IP address.
The NAT, DHCP server and firewall functions on the NBG6617 are still available in this
mode.
Apply Click Apply to save your changes back to the NBG6617.
Cancel Click Cancel to begin configuring this screen afresh.
Table 20 Network > WAN > Internet Connection: IPoE Encapsulation (continued)
LABEL DESCRIPTION
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NBG6617 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NBG6617 in the language / languages: English as an attachment in your email.

The manual is 12,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NBG6617

ZyXEL NBG6617 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info