607214
233
Zoom out
Zoom in
Previous page
1/306
Next page
Chapter 26 Troubleshooting
NBG318S User’s Guide
233
Check the settings for QoS. If it is disabled, you might consider activating it. If it is
enabled, you might consider raising or lowering the priority for some applications.
26.4 Resetting the NBG318S to Its Factory Defaults
If you reset the NBG318S, you lose all of the changes you have made. The NBG318S re-loads
its default settings, and the password resets to 1234. You have to make all of your changes
again.
V You will lose all of your changes when you push the RESET button.
To reset the NBG318S,
1 Make sure the PWR LED is on and not blinking.
2 Press and hold the RESET button for five to ten seconds. Release the RESET button
when the PWR LED begins to blink. The default settings have been restored.
If the NBG318S restarts automatically, wait for the NBG318S to finish restarting, and log in to
the web configurator. The password is “1234”.
If the NBG318S does not restart automatically, disconnect and reconnect the NBG318S’s
power. Then, follow the directions above again.
26.5 Wireless Router/AP Troubleshooting
V I cannot access the NBG318S or ping any computer from the WLAN (wireless
AP or router).
1 Make sure the wireless LAN is enabled on the NBG318S
2 Make sure the wireless adapter on the wireless station is working properly.
3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible
and supports the same wireless standard as the NBG318S.
4 Make sure your computer (with a wireless adapter installed) is within the transmission
range of the NBG318S.
5 Check that both the NBG318S and your wireless station are using the same wireless and
wireless security settings.
6 Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the
NBG318S.
7 Make sure you allow the NBG318S to be remotely accessed through the WLAN
interface. Check your remote management settings.
See the chapter on Wireless LAN in the Users Guide for more information.
233


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NBG-318S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NBG-318S in the language / languages: English as an attachment in your email.

The manual is 12,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NBG-318S

ZyXEL NBG-318S Quick start guide - English, German, French, Italian, Swedish, Spanish - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info