730107
325
Zoom out
Zoom in
Previous page
1/355
Next page
Chapter 20 Troubleshooting
NAS Series User’s Guide
325
The NAS Starter Utility discovered my NAS but the status is always unreachable, even though I can
access it.
You may need to add the NAS Starter Utility to your software firewall’s allow list or lower your software
firewall or anti-virus scanner’s security level. Alternatively you may have to configure your software
firewall or other security software to allow UDP port 50127 traffic from the NAS. If there is a hardware
firewall between you and the NAS, configure it to allow UDP port 50127 traffic from the NAS.
I have at least two NASs in my network, how do I identify which one I want to configure in the NAS
Starter Utility screens.
If you have several NASs connected to your computer/network, give each a unique name. You may
have to disconnect all but one and use the NAS Starter Utility to rename it. Then connect another NAS
and rename it and continue to connect and rename the NASs one-by-one until they are all connected
and each has a unique name.
Alternatively, if you have a DHCP server on your network and you can access it’s list of assigned IP
addresses, you could see which IP address belongs to which NAS. You can check the MAC address of
your NAS by checking the attached sticker in the device housing.
20.4 NAS Login and Access
I forgot the server name of the NAS.
The default server name is ‘NAS’ followed by the number of your model (‘NAS540’ for example).
Use FindMe or the NAS Starter Utility to discover your NAS. If you have admin privileges, you can
directly change the IP address of the NAS using the NAS Starter Utility.
If the server name has changed and you don’t have the NAS Starter Utility, see Section 2.2 on page
18 to use FindMe. Otherwise, see Section 1.7 on page 16 to use the RESET button to return to the
default setting.
I cannot get to the NAS login screen.
Use FindMe or the NAS Starter Utility to discover your NAS. If you have admin privileges, you can
directly change the IP address of the NAS using the NAS Starter Utility.
If you used the RESET button, the NAS may have a new IP address. Close and reopen the NAS Starter
Utility to discover the NAS.
Make sure the NAS is turned on.
325


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NAS542 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NAS542 in the language / languages: English as an attachment in your email.

The manual is 13,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NAS542

ZyXEL NAS542 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info