796863
123
Zoom out
Zoom in
Previous page
1/192
Next page
Multy WiFi System User’s Guide
123
6.6 Bridge Mode Overview
Use your Multy M1 as a bridge if you already have a router or gateway on your network. In this mode
your Multy M1 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the
figure below for an example.
Many screens that are available in Standard Mode are not available in Bridge Mode, such as port
forwarding and firewall. See Section 5.3 on page 116 for more information.
6.7 What You Can Do
Set up a network with the Multy M1 as a bridge (Section 6.8 on page 123).
Use the Status screen to view read-only information about your Multy M1 (Section 6.9 on page 125).
6.8 Setting your Multy M1 to Bridge Mode
1Log into the Web Configurator if you haven’t already. See the Quick start Guide for instructions on how
to do this.
2To use your Multy M1 as a bridge, go to Settings > System > Operating Mode and select Bridge Mode.
Note: You can only set the Multy M1 to Bridge Mode when using the Internet Protocol over
Ethernet (IPoE) WAN service.
IP Subnet Mask This shows the WAN port’s subnet mask.
Gateway This shows the WAN port’s gateway IP address.
IPv6 Address This shows the current IPv6 address of the Multy M1.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP Server This shows the LAN port’s DHCP role - Enable or Disable.
IPv6 Address This shows the current IPv6 address of the Multy M1 in the LAN.
Table 9 Settings > System > Status (Standard Mode) (continued)
LABEL DESCRIPTION
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL MULTY X - WSQ50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL MULTY X - WSQ50 in the language / languages: English as an attachment in your email.

The manual is 5.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info