679717
42
Zoom out
Zoom in
Previous page
1/174
Next page
Chapter 5 Home Networking
LTE7410 User’s Guide
42
5.4 The Static DHCP Screen
This table allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Other config flag
on
Select this to have the LTE Device indicate to hosts to obtain DNS information through
DHCPv6.
Clear this to have the LTE Device indicate to hosts that DNS information is not
available in this network.
Advertisement
interval option on
Select this to have the Router Advertisement messages the LTE Device sends specify
the allowed interval between Router Advertisement messages.
Hop limit Enter the maximum number of network segments that a packet can cross before
reaching the destination. When forwarding an IPv6 packet, IPv6 routers are required
to decrease the hop limit by 1 and to discard the IPv6 packet when the Hop Limit is 0.
Possible values for this field are 0-255.
Router Lifetime Enter the time in seconds that hosts should consider the LTE Device to be the default
router. Possible values for this field are 0-9000.
Router Preference Select the router preference (Low, Medium or High) for the LTE Device. The LTE
Device sends this preference in the router advertisements to tell hosts what
preference they should use for the LTE Device. This helps hosts to choose their default
router especially when there are multiple IPv6 routers in the network.
Note: Make sure the hosts also support router preference to make this function work.
Reachable Time (ms) Enter the time in milliseconds that can elapse before a neighbor is detected. Possible
values for this field are 0-3600000.
Retrans Timer (ms) Enter the time in milliseconds between neighbor solicitation packet retransmissions.
Possible values for this field are 1000-4294967295.
RA Interval Enter the time in seconds between router advertisement messages. Possible values for
this field are 4-1800.
Delegate MTU from
WAN
Select this to have the LTE Device obtain the MTU setting from the service provider or
uplink router.
Manual Select this to specify the MTU manually.
MTU The Maximum Transmission Unit. Type the maximum size of each IPv6 data packet, in
bytes, that can move through this interface. If a larger packet arrives, the LTE Device
divides it into smaller fragments.
DAD attempts Specify the number of DAD (Duplicate Address Detection) attempts before an IPv6
address is assigned to the LTE Device LAN interface. Possible values for this field are
1-7.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Advanced Setup Click this to close the IPv6 LAN Setup Advanced Setup section.
Table 7 Network Setting > Home Networking > IPv6 LAN Setup (continued)
LABEL DESCRIPTION
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE7410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE7410 in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info