679717
29
Zoom out
Zoom in
Previous page
1/174
Next page
Chapter 4 Broadband
LTE7410 User’s Guide
29
4.2.1 Edit LTE Connection
In Network Setting > Broadband, click the Edit icon next to an LTE connection to display the
following screen. Use this screen to configure an LTE WAN connection.
Figure 12 Network Setting > Broadband > LTE Interface Edit
The following table describes the fields in this screen.
Table 3 Network Setting > Broadband > LTE Interface Edit
LABEL DESCRIPTION
General
Active Select this to have the LTE Device use the LTE connection.
Name Specify the name for this WAN interface.
Auto APN Select Auto to have the LTE Device configure the APN (Access Point Name) of an LTE network
automatically. Otherwise, select Manual and enter the APN manually in the field below.
IPv4/IPv6
Dual Stack
Select IPv4 if you want the LTE Device to run IPv4 only.
Select IPv6/IPv4 to allow the LTE Device to run IPv4 and IPv6 at the same time.
Select IPv6 if you want the LTE Device to run IPv6 only.
MTU
MTU
The Maximum Transmission Unit (MTU) defines the size of the largest packet allowed on an
interface or connection. Enter the MTU for this WAN interface in this field.
Routing Feature
NAT Enable Select this to activate NAT on this WAN interface.
Default
Gateway
Select this option to have the LTE Device use the WAN interface of this connection as the
system default gateway.
IP
Passthrough
IP Passthrough allows a LAN computer on the local network of the LTE Device to have access
to web services using the public IP address. When IP Passthrough is configured, all traffic is
forwarded to the computer and will not go through NAT.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE7410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE7410 in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info