730079
141
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 22 Bandwidth Management
LTE3316-M604 User’s Guide
141
Figure 83 Bandwidth Management Rule Configuration
The following table describes the labels in this screen.
Table 61 Bandwidth Management Rule Configuration
LABEL DESCRIPTION
QoS Rule Configuration
Interface Select the LTE's interface through which traffic in this shaper applies.
Group Select to use the IP address or MAC address of the destination computer for whom this rule
applies.
Service
Specify the service type of traffics that have to be applied with the QoS rule. It can be All,
DSCP, TOS, User-defined Service, or Well-known Service.
•Select All for all packets.
•Select DSCP for DSCP-type packets only.
•Select TOS for TOS-type packets only. You have to select a service type (Minimize-Cost,
Maximize-Reliability, Maximize-Throughput, or Minimize-Delay) from the drop-down list as
well.
•Select User-defined Service for user-defined packets only. You have to define the port
range and protocol as well.
•Select Well-known Service for specific application packets only. You have to select the
required service from the drop-down list as well.
Resource
Specify the Resource Type and corresponding Control function for the QoS rule. The
available Resource options are Bandwidth, Connection Sessions, Priority Queues, and
DiffServ Code Points.
Bandwidth: Select Bandwidth as the resource type for the QoS Rule, and you have to
assign the minimum rate, maximum rate and rate unit as the bandwidth settings in the
Control Function / Set MINR & MAXR field.
Connection Sessions: Select Connection Sessions as the resource type for the QoS Rule,
and you have to assign supported session number in the Control Function / Set Session
Limitation field.
Priority Queues: Select Priority Queues as the resource type for the QoS Rule, and you
have to specify a priority queue in the Control Function/ Set Priority field.
DiffServ Code Points: Select DiffServ Code Points as the resource type for the QoS Rule,
and you have to select a DSCP marking from the Control Function / DSCP Marking drop-
down list.
Control Function Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or minimum
bandwidth allowed for the rule in Kbps (kilobytes per second) or Mbps (megabytes per
second).
141


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info