730079

ZyXEL LTE3316-M604 Manual

137
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 21 MGMT Interface
LTE3316-M604 User’s Guide
137
21.5 Remote MGMT
Use this screen to configure through which IP address the LTE can be accessed. You can also specify the
port numbers the IP addresses must use to connect to the LTE. Click Configuration > Management >
MGMT Interface > Remote MGMT to open the following screen.
Note: The firewall will be disabled when remote management is enabled. To activate the
firewall, you’ll need to create a new firewall rule to allow the remote management
traffic to come in from the WAN side.
Figure 80 Configuration > Management > MGMT Interface > Remote MGMT
The following table describes the labels in this screen.
Table 59 Configuration > Management > MGMT Interface > Remote MGMT
LABEL DESCRIPTION
HTTPS
Enable Select this check box to allow access to the LTE Device from the IP address and
activate the HTTPS settings you’ve made in the Local MGMT screen.
IP address This is the IP address of a computer that may use to access the LTE.
Netmask This is the subnet mask identifying a computer that may access remotely to the LTE.
Port This is the port number that the computer must use to access the LTE. If the HTTP Port
number was changed to 8080 in the Configuration > Management > MGMT
Interface > Local MGMT screen, then this computer should use the same number. For
example http://1.1.1.1:8080 where 1.1.1.1 is the IP address of the LTE.
SSH
Enable Select this to allow the computer with the IP address that matches the IP address to
access the LTE CLI using SSH service.
IP address Specify the IP address identifying the computer that can access the LTE using SSH
service.
Netmask This is the subnet mask of the computer that may access using SSH service.
Port This is the port number that the computer must use to access the LTE.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes back to the LTE.
… 137 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info