730079
127
Zoom out
Zoom in
Previous page
1/191
Next page
Chapter 18 VPN
LTE3316-M604 User’s Guide
127
The following table describes the labels in this screen.
18.6 VPN Passthrough
Use this screen to allow VPN traffic through the LTE. Click Configuration > Application > VPN > VPN
Passthrough to open the following screen.
Figure 75 Configuration > Application > VPN > VPN Passthrough
Table 53 GRE: Add
LABEL DESCRIPTION
Name Enter a name for this GRE tunnel, this name must be 1~9 characters long.
Enable Select this to enable the GRE tunnel.
Remote IP Specify the IP address of the remote gateway to which this interface tunnels traffic.
TTL Specify the Time To Live (TTL). This is a time limiter that defines the lifetime of a
packet. Every time the packet is forwarded, it will reduce the TTL value by 1, if this
time limiter reaches 0, the packet will be discarded. The default value is 255.
Key This displays the key for the GRE connection, a value between 0 ~ 9999999999. The
GRE tunnel will request this key for packet transportation. The client needs to enter
this key to authenticate the source of the packet.
Keep Alive The LTE can send periodic keep alive frames, so the GRE tunnel does not go down.
Specify how often these frames are sent in seconds to keep the GRE tunnel up.
Tunnel IP Specify the IP address to use as the source address for the packets this interface
tunnels to the remote gateway. The remote gateway sends traffic to this IP address.
MTU Maximum Transmission Unit. Type the maximum size of each data packet, in bytes,
that can move through this interface. If a larger packet arrives, the LTE divides it into
smaller fragments. The default value is 2000.
Remote Subnet Enter the remote subnet mask to which this interface tunnels traffic.
Back Click Back to return to the previous screen without saving.
Cancel
Click Cancel to exit this screen without saving.
Apply Click Apply to save your changes back to the LTE.
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3316-M604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3316-M604 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info